User manual PANASONIC SC-HTE180EG

[. . . ] SC-HTE180 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. Book Page 2 Monday, February 10, 2014 6:17 PM Do the procedures with the remote control. [. . . ] Dims the display panel after 5 seconds of inactivity. ON OFF The system automatically switches off if there is no audio input and when you do not use it for 20 minutes. ON OFF Sets the volume limit to 50 when you switch on the system although the volume is set to above 50 before it is switched off. ON OFF This function allows you to connect a paired Bluetooth® device when this system is in standby mode. oN OFF The system will switch on automatically when you connect a paired Bluetooth® device. Change the Bluetooth® connection link mode to suit the connection type. Make sure to disconnect the current connected device (“BLUETOOTH READY” is shown). ON OFF Select “OFF” when your HDAVI Control device does not work correctly with this system. Switch off all connected devices and then switch them on again after changing the setting. lOW VOL MODE DIMMER AUTO POWER DOWN Note: The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. VOL LIMITATION Audio format You can view the current audio format. Changed settings will be kept until it is changed again, unless otherwise indicated. 10 10 Until:10 Mar 2014 Confidential RQT9939 printing RQT9939-Z. Book Page 11 Monday, February 10, 2014 6:17 PM Linked operations with the TV (VIERA Link™ “HDAVI Control™”) What is VIERA Link “HDAVI Control”?VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation What you can do with VIERA Link “HDAVI Control” To make sure that the audio is output from this system, turn the main unit on by using the TV’s remote control and selecting home cinema from the speaker menu of VIERA Link menu. The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details. a Confirm that the HDMI connection has been made. [. . . ] Note for the battery symbol (bottom symbol): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Anslutning till en 4K Ultra HD-TV Systemet kan inte låta 4K-videosignalen från en 4K-kompatibel utrustning passera till en 4K Ultra HD-TV. * Se till att ansluta HDMI-kabeln till ARC-kompatibla uttag. [. . . ]