User manual PANASONIC SCHX150

[. . . ] Unless otherwise indicated, illustrations in these operating instructions are of SC-AK340. Your unit may not look exactly the same as illustrated. 2 x Remote control batteries 1 x Power plug adaptor 1 x FM indoor antenna 1 x AM loop antenna 1 x Remote Control (N2QAHB000065) GCP En Sp RQTV0070-1M L1105KE1115 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. [. . . ] · Do not write anything on the disc. Using DualDiscs The "CD" sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. DANSK Not doing the following will cause damage to the unit. · Press [y/I, POWER] to turn off the unit and remove the power plug only after all the displays have disappeared. FRANÇAIS 4 Press [ENTER]. Press [4, REW / ] or [¢, previous or next match. Album title search / FF] to search for Blinks to indicate album title search mode · Always press [0, OPEN/CLOSE] to insert or remove a disc. · Do not push or pull out the tray by hand as this will cause an accident. Matched album title Track title search Matched track title LANG - 4 Blinks to indicate track title search mode 5 Press [6, CD] to start play from the album/track found. Note: This function does not work during any random/program mode. LANG - 5 · Place the disc correctly label-up as shown in the diagram. · Insert one disc into the tray. RQTV0070 10 RQT8043 Cassette tape ­ Play and record NOTE on MP3 or WMA · Files are treated as tracks and folders are treated as albums. · This unit can access up to 999 tracks, 255 albums and 20 sessions. · Disc must conform to ISO9660 level 1 or 2 (except for extended formats). · To play in a certain order, prefix the folder and file names with 3-digits numbers in the order you want to play them. The buttons described for "Cassette tape ­ Play and record" are mainly for the main unit unless indicated otherwise. Basic play You can use either DECK 1 or DECK 2 for tape playback. High position and metal position tapes can be played, but the unit will not be able to do full justice to the characteristics of these tapes. When "NOT MP3/ERROR1" appears on the display, an unsupported MP3 format is being played. The unit will skip that track and play the next one. 2) Insert the recorded tape into DECK 2. 3) Press [¶, REC]. FRANÇAIS Recording Selection of tapes for recording Use normal position tapes. High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly. Preparation Wind up the leader tape so recording can begin immediately. erase a recorded sound Note: · Changes to volume and sound adjustments do not affect recording. · You cannot open DECK 1 while recording. · You cannot fast-forward or rewind one deck while recording with the other. 1 2 Press [OPEN 0] for DECK 2 and insert the cassette to be recorded. Insert with the side to be recorded facing towards you and the exposed tape facing down. (\ page 13) Disc recording: Insert the disc(s) you want to record. Prepare the desired disc recording mode. To record programmed tracks Action Perform steps 2 to 4 in "Program play" (\ page 8). Perform steps 3 to 6 in "Program play" (\ page 8). Erasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown. Side A LANG - 4 Tab for side B Tab for side A To re-record Normal cassette LANG - 5 Adhesive tape 12 RQT8043 RQTV0070 Radio Manual tuning Memory preset ENGLISH RQT8043 RQTV0070 1 2 3 Press [TUNER, BAND] to select "FM" or "AM". [. . . ] The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit. Using the cassette deck Poor quality sound. ) If the erasure prevention tabs have been removed, cover the holes with adhesive tape. # Playing discs The display is wrong or play won't start. [. . . ]