User manual PANASONIC SCNE1EB

[. . . ] SC-NE1_EB~VQT4U45. book 1 ページ ２０１３年１月１５日　火曜日　午後８時２０分 Operating Instructions Wireless Speaker System Model No. SC-NE1 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2, 3 and 12, 13) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] ≥ Do not use this system near an equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc). 4 VQT4U45 SC-NE1_EB~VQT4U45. book 5 ページ ２０１３年１月１５日　火曜日　午後８時２０分 Control reference guide Top view 1 − VOLUME ＋ SOUND 2 1 4 9 10 11  OK  4 PLAY MENU 5 SETUP 3 5 6 7 8 1 Standby/on switch [Í/I] ([Í]) Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. ∫ Before using for the first time Remove the insulation sheet A. 2 3 4 5 6 7 Enter sound menu Enter setup menu Select Bluetooth®/AUX Adjust the volume (0 (min) to 50 (max)) Enter the Bluetooth® menu/ Change the sound input level of the external device (l 6) Mute the sound Mutes the sound. “MUTE” is also cancelled when the volume is adjusted or the unit is turned off. ∫ To replace a button-type battery Battery type: CR2025 (Lithium battery) 1 2 8 9 10 11 Selection/OK Dynamic Bass sound effect selector Display Remote control signal sensor Distance: Within approx. ≥ To avoid interference, please do not put any objects in front of signal sensor. ≥ Set the button-type battery with its (i) mark facing upward. ≥ Keep the button-type battery out of reach of children to prevent swallowing. 5 VQT4U45 SC-NE1_EB~VQT4U45. book 6 ページ ２０１３年１月１５日　火曜日　午後８時２０分 Connections Connect the AC mains lead. This unit consumes a small amount of AC power (l 11) even when turned off. ≥ In the interest of power conservation, if you will not be using this unit for an extended period of time, unplug it from the household mains socket. To household mains socket AC mains lead (supplied) READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION. ≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily influenced by magnetism. ≥ When this unit is turned on for the first time after purchase, a message prompting you to connect a Bluetooth® device (“PAIRING”) is displayed. (l 7) Additional Connection Connect an external music device (for AUX mode). 1 Plug the audio cable (not supplied) into the AUX jack. Plug type: ‰3. 5 mm stereo 2 Press [ , AUX] to select “AUX” and start playback on the connected device. Audio cable (not supplied) ∫ To select the sound input level of the external device 1 While in “AUX” mode, press [PLAY MENU] repeatedly to select “INPUT LEVEL” and then press [OK]. 2 Press [3, 4] to select “NORMAL” or “HIGH”. ≥ The default setting is “NORMAL”. 6 ≥ Switch the equalizer off or turn the volume of the external device down to reduce the input signal. High level of input signal will distort the sound. ≥ For details, refer to the instruction manual of the other equipment. “READY” is indicated on the display. Select “SC-NE1” from the Bluetooth® device’s Bluetooth® menu. {. The name of the connected device is indicated on the display for 2 seconds. ≥ Select “LEVEL 0” if the sound is distorted. ≥ The default setting is “LEVEL 0”. Start play on the Bluetooth® device. Disconnecting a Bluetooth® device ≥ This unit can only be connected to one device at a time. ≥ When “BLUETOOTH” is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ≥ The Bluetooth® device will be disconnected if “AUX” is selected as an audio source. 1 2 While a Bluetooth® device is connected: Press [PLAY MENU] to select “DISCONNECT?”. YES” and then press [OK]. 7 VQT4U45 SC-NE1_EB~VQT4U45. book 8 ページ ２０１３年１月１５日　火曜日　午後８時２０分 Sound adjustment The following sound effects can be added to the audio output. 1 2 Press [SOUND] repeatedly to select the effect. Press [3, 4] to select the setting and then press [OK]. “LEVEL 1”, “LEVEL 2” or “OFF”. ≥ The factory preset is “OFF”. Direct-Vocal Surround (D. SURROUND) Preset EQ (PRESET EQ) “HEAVY” (heavy), “SOFT” (soft), “CLEAR” (clear), “VOCAL” (vocal) or “FLAT” (flat/off). ≥ The factory preset is “HEAVY”. Bass (BASS) or Treble (TREBLE) Dynamic Bass*1 (D. BASS) Adjust the level (j4 to i4). [. . . ] ≥ Keep the wall mount brackets out of reach of children to prevent swallowing. 1 Measure and mark the position of the wall mount brackets (Both sides). {. Use figures below to identify the screwing positions. The position to attach the wall mount brackets 12. 5 mm 252 mm Space required 82 mm Safety precautions Professional installation is required. The installation should never be done by any other than a qualified installation specialist. PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING. [. . . ]