User manual PANASONIC SC-PM04EB

[. . . ] IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . Listening caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Placement of speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The example shows how to set the clock for 6:30 pm. TUNER BAND TAPE APE STOP 1 2 3 DISPLAY Press [y] to turn the unit on. y Press [CLOCK / TIMER] to display "CLOCK". VOL FM MODE TUNE MODE REW SOUND PRESET VIRTUALIZER VIRTUALIZER EQ VOL FF MUTING MU ING DISPLAY DISPLA DIMMER 3 Within 10 seconds 1 2 Press [g, REW/ 4] or [f, 3 /FF] to set the time. Press and hold to change the time faster. 4 Press [CLOCK / TIMER]. The time is set and the original display is restored. To switch to clock display Press [DISPLAY]. Each time you press the button: Clock display Current display To show the time (when the unit is ON) Press [CLOCK / TIMER]. The clock is shown for about 10 seconds. 3 4 B PROGRAM/ CLEAR CD PLAY PLA MODE CD REC MODE SLEEP CLOCK CL CK TIMER PLAY REC Note The clock may lose or gain some time over a period. Readjust if necessary. B Convenient Functions by remote control only To dim the display panel Use this when you are going to sleep or any other time you would prefer the panel to be dimmer. The display panel dims except for the [AC IN] indicator. To cancel Press [DIMMER] again. 1 4 7 2 5 8 0 CD 3 6 9 10 TUNER BAND TAPE APE STOP VOL FM MODE TUNE MODE REW SOUND PRESET VIRTUALIZER VIRTUALIZER EQ VOL FF To mute the volume DIMMER BASS TREBLE MUTING MUTING MU ING DISPLAY DISPLA DIMMER This feature is convenient when you have a telephone call, etc. ("MUTING" goes out. ) Muting can also be cancelled by lowering the volume all the way to (-- dB). When the system is turned off, the muting operation will be automatically cancelled. MUTING C DEMO C Turning the demo function off If the clock has not been set, a demonstration of the display is shown when the unit is switched to standby. This function is set to on at the time of purchase. Press and hold [­DEMO] until "DEMO OFF" is displayed. Press [PROGRAM/­CLEAR]. The station occupying a memory number is erased if another station is preset in that memory number. Selecting channels Press the numbered buttons to select the channel. For channels 1 to 9 press the corresponding number. For channels 10 to 15 press [ 10], then the two digits. 1 Preset channel 1 Press [TUNE MODE] to select " PROGRAM ". 2 Press [g, REW/ 4] or [f, 3 / FF] to OR select the channel. 2 PROGRAM Adjust the volume. RQT6675 Listening operations Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to begin (\ page 10). 11 CDs This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process that enables CD-R/CD-RW players to play audio CD-R and CD-RW) upon completion of recording. It may not be able to play some CD-R or CD-RW due to the condition of the recording. 1 2 / REW / , / FF / 4 5 3 1 2 3 4 5 Press [POWER y / I] to turn the unit on. Press [STOP L] to select the CD mode. Every time you press the button: CD TAPE Listening operations 1 2 3 POWER Press [OPEN/CLOSE c] to open the tray, load a CD, and press [OPEN/CLOSE c] to close the tray. Press [CD -/ J] to start play. Plays to the end of the CD and stops. Adjust the volume. To stop the disc Press [STOP L]. STOP To pause play Press [CD -/J]. Skipping tracks Press [g/REW/ 4] (backward) or [3 /FF/ f] (forward). 3 Searching through tracks During play or pause Press and hold [g/REW/ 4] (backward) or [3 /FF/ f] 3 (forward). One touch play When a CD is loaded and the unit is off, press [CD -/ J]. Note · During random play (\ page 13), you cannot skip to tracks which have already been played. [. . . ] Using the cassette deck Poor quality sound. Playing discs The display is wrong or play won't start. The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change to an outdoor antenna. 7 The TV antenna wire is too close to the unit. [. . . ]