User manual PANASONIC SC-XH50EB

[. . . ] Obrázek pedstavuje model SC-PT70. Na rysunku przedstawiono model SC-PT70. Operating Instructions DVD Home Theater Sound System Model No. SC-XH50 Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Other connected equipment compatible with VIERA Link "HDAVI Control" stays on. For details, refer also to the operating instructions for your TV. Easy control only with VIERA remote control (For "HDAVI Control 2 or later") You can control the playback menus of this unit with the TV's remote control. When operating the TV's remote control, refer to the below illustration for operation buttons. 1 Select this unit's operation menu by using the TV menu settings. (For details, refer to the operating instructions for your TV. ) The START menu will be shown. [DVD-V] DVD/CD Playback Disc TOP MENU(DVD) MENU(DVD) Input Selection Setup Home Cinema Speaker selection You can select whether audio will output from this unit's speakers or the TV speakers by using the TV menu settings. For details, refer to the operating instructions for your TV. Home Cinema This unit's speakers are active. When you turn on this unit, this unit's speakers will be automatically activated. When this unit is in standby mode, changing the TV speakers to this unit's speakers in the TV menu will automatically turn this unit on and select "AV"§2, "AUX"§2 or "ARC"§1, 2 as the source. The TV speakers are automatically muted. You can control the volume setting using the volume or mute button on the TV's remote control. (The volume level is displayed on this unit's display. ) To cancel muting, you can also use this unit's remote control ( 4). If you turn off this unit, TV speakers will be automatically activated. The volume of this unit is set to "0". ­This function works only when "DVD/CD", "USB", "AV"§2, "AUX"§2, or "ARC"§1, 2 is selected as the source on this unit. Audio output is 2-channel audio. When switching between this unit speakers and TV speakers, the TV screen may go blank for several seconds. The START menu can also be shown by using a button on the TV's remote control (e. g. ­When "DVD/CD" or "USB" is selected as the source, the TV's remote control works only during stop mode. 2 Select the desired item on the START menu ( 10). Depending on the menu, some button operations cannot be performed from the TV's remote control. You cannot input numbers with the numbered buttons on the TV's remote control ([0] to [9]). Use this unit's remote control to select the play list etc. §1 The selection works only when using an ARC compatible TV. §2 "AV", "AUX" or "ARC" works depending on the TV audio setting ( 16, Setting the audio link with the TV). [. . . ] Service Do not attempt to repair this unit by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorized service center. Electric shock or damage to the unit can occur if the unit is repaired, disassembled or reconstructed by unqualified persons. Extend operating life by disconnecting the unit from the power source if it is not to be used for a long time. Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. [. . . ]