User manual PANASONIC SHWL40EG

[. . . ] Book 2 ページ ２０１６年１１月２９日　火曜日　午後６時２０分 Accessories ∏ 1 AC adaptor ∏ 1 DC cable AC adaptor [ENGLISH] Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. this unit is a Wireless LAN Range Extender. It expands the coverage area of your wireless LAN network when used with an ALLTM wireless speaker. [. . . ] ‰ Match the frequency band of this unit with that of the ALLTM wireless speaker. ‰ If a connection attempt fails, repeat the procedure from Step 2. (l 4) ≥ Depending on the materials and number of walls and other environmental factors, signals may be blocked. ‰ Signals are particularly vulnerable to blockage if there is any of the following obstacles between the wireless broadband router or the ALLTM wireless speaker and this unit: metal object (reinforced concrete, furniture made of metal materials, etc. ‰ Use of two or more wireless LAN range extenders (this unit, wireless broadband router, etc. ) will extend the signal coverage of your wireless network, but this will cause audio to break up frequently. If you cannot connect to a network with the connection method described above, you can connect this unit to a computer to set up a connection. For details, refer to the “Operating Instructions <Full version>”. Wireless LAN Range Extender Further Support For more information and other network setting methods, refer to the Operating Instructions <Full version>. If you require further help, please visit http://panasonic. ) The LAN1, and LAN2 indicators light up Wireless LAN signal strengh: normal The LAN2 indicator lights up Wireless LAN signal strengh: weak After the indicators light up for about 2 seconds, the LINK, LAN1, and LAN2 indicators flash three times. ‰ Move this unit to a location where two or three of the indicators light up and place it there. ‰Tryck på den och håll kvar i 3 till 6 sekunder för att ansluta till ett 2, 4 GHz-nätverk. ) ∫ AVSNITT OM UTTAG LAN-port DC IN 2 10 Base-T/100 Base-TX 5 V 1, 8 A AC 110 V till 240 V, 50 Hz/60 Hz, 0, 25 A 1, 2 m (USB A till likströmskontakt) Cirka 3, 0 W Cirka 2, 3 W Cirka 2, 5 W Cirka 100, 0 mmk23, 0 mmk67, 2 mm Cirka 81, 0 g 0 oC till r40 oC 10 % till 80 % RH (ingen kondensation)  ∫ TILLBEHÖR AC-adapter Likströmskabel ∫ ALLMÄNT Energiförbrukning Effektförbrukning i “nätverksstandbyläge”*1 Effektförbrukning i “nätverksstandbyläge”*2 Mått (BkHkD) Vikt Område för drifttemperatur Område för luftfuktighet  A Likströmskabel (medföljer)  Kontrollera kontakternas riktning och sätt sedan i dem rakt eller dra dem rakt ut. JSå här ansluter du till ett 2, 4 GHz-nätverk: Tryck och håll in [jLINK/-LEVEL]knappen i cirka 3 till 6 sekunder. ‰ Den trådlösa ALLTM-högtalaren kan inte ansluta till den här apparaten, men till den trådlösa bredbandsroutern. Om du inte kan ansluta till ett nätverk med den anslutningsmetod som beskrivs ovan, kan du ansluta den här apparaten till en dator för att göra anslutningen. For yderligere hjælp, support og råd om dit tilsluttede ALLTM lydprodukt kan du besøge: http://panasonic. ) Tilbehør ∏ 1 Lysnetadapter ∏ 1 jævnstrømskabel Lysnetadapter ≥ For at mindske risikoen for brand, elektrisk stød eller produktskade, – Sørg for, at strømforsyningsspændingen svarer til den spænding, der er angivet på apparatet. Forsigtighedsregler ADVARSEL Apparat ≥ For at mindske risikoen for brand, elektrisk stød eller produktskade, – Dette apparat må ikke udsættes for regn, fugt, dryp eller sprøjt. ‰ For at mindske risikoen for brand, elektrisk stød eller produktskade, – Dette apparat må ikke udsættes for direkte sollys, høje temperaturer, høj luftfugtighed eller kraftige vibrationer. 2 3 4 5 6 5 G-indikator 2, 4 G-indikator LINK / Indikator til signalstyrke for trådløst LAN (kraftig)*2 LAN1 / Indikator til signalstyrke for trådløst LAN (normal)*2 LAN2 / Indikator til signalstyrke for trådløst LAN (dårlig)*2 TQBM0010 31 SH-WL40-TQBM0010_mst. [. . . ] For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. [. . . ]