User manual PANASONIC TH-152UX1

[. . . ] Model No. TH-152UX1 Operating Instructions High Definition Plasma Display English Please read these instructions before operating your set and retain them for future reference. Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. [. . . ] · Depending on the player or contents, the image may be different from the above illustrations. 20 On-Screen Menu Displays Remote Control Unit MENU 1 Display the menu screen. Press to select. (Example: Picture menu) Press several times. Each time the MENU button is pressed, the menu screen will switch. /Size 2 Select the item. Picture Normalise Normal Select. ENTER/ Press. Select. Picture Mode Contrast Brightness Colour Hue Sharpness White balance Advanced settings Memory save Memory load Memory edit Normal 25 0 0 0 5 Normal (Example: Picture menu) 3 Set. Adjust. ENTER/ Press. Adjust. 4 Exit the menu. Press Press. MENU Press several times. to return to the previous menu. Menu display list Pos. /Size Normalise Auto Setup Normal Picture menu Picture Normalise Normal Setup menu Setup Normal 25 0 0 0 5 Normal 3D Settings Signal Screensaver Extended life settings Input label Power save Off PC Power management Off Auto power off Off OSD Language English (UK) H-Pos H-Size V-Pos V-Size Dot Clock Clock Phase Clamp Position Over scan Scaling Mode 0 0 0 0 0 0 0 Picture Mode Contrast Brightness Colour Hue Sharpness White balance Advanced settings Off HV-Fit see page 22-24 Memory save Memory load Memory edit see page 34-41 see page 25-33 21 Adjusting Pos. /Size 1 2 3 4 Press to display the Pos. Press to select the menu to adjust. Pos. /Size Normalise Auto Setup Normal Press to adjust the menu. H-Pos H-Size V-Pos V-Size Dot Clock Clock Phase Clamp Position Over scan Scaling Mode 0 0 0 0 0 0 0 Off HV-Fit Press to exit from adjust mode. Note: Unadjustable items are grayed out. Adjustable items differ depending on the input signal and the display mode. Note: If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos. /Size function. Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB or PC signal is received. This setting is enabled under the following conditions: · When the signal is not PC format, this setting is enabled only if "Over scan" (see page 23) is "Off", and H-Size/V-Size is not automatically adjusted. This setting will be invalid and will not work under the following conditions: · Aspect is set to "Just" · "Under scan" is set to "On" Using Remote Control When on the remote control is pressed, "Auto Setup" will be executed. When Auto Setup does not work, "Invalid" is displayed. Auto mode When the "Auto Setup" is set to "Auto" in the Options menu (see page 43), automatic position adjustment starts: · When the display power is turned ON. · When the input signal is switched. Notes: · If the dot clock frequency is 162 MHz or higher, Dot Clock and Clock Phase cannot be made. · When digital RGB signal input, Dot Clock and Clock Phase cannot be made. · Auto Setup may not work when a cropped or dark image is input. In such case, switch to a bright image with borders and other objects are clearly shown, and then try auto setup again. · Depending on the signal, out of alignment may occur after Auto Setup. Carry out fine tuning for the position/size as required. [. . . ] Press to select "OSD Language". Press for more than 3 seconds. 3D Settings Signal Screensaver Extended life settings Input label Power save Off PC Power management Off Auto power off Off OSD Language English (UK) 3 Press to select "Shipping". Options Shipping Press to display the Shipping menu. Press to select "YES". 4 Shipping YES NO Press to confirm. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the or button to select "OSD Language". [. . . ]