User manual PANASONIC TX-32LZD81

[. . . ] Remove the mains plug from the wall socket when the TV is not used for a prolonged period of time. Power source This TV is designed to operate on 220-240V, 50 / 60 Hz AC. Do not remove the cover Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside. Do not expose to direct sunlight and other sources of heat Avoid exposing the TV to direct sunlight and other sources of heat. To prevent fire never place any type of candle or naked flame on top or near the TV. AC 220-240 V 50 / 60 Hz IMPORTANT: THE MOULDED MAINS PLUG FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] Colour Sys. 1 2 3 4 5 CH33 CH21 CH21 CH60 CH21 456 123 XYZ FTP SC1 SC1 SC1 SC1 SC1 Auto Auto Auto Auto Auto Select the "Sound Sys. " field Select sound system SC1 : SC2 : SC3 : F: PAL B, G, H / SECAM B, G PAL I PAL D, K / SECAM D, K SECAM L / L' · To change colour system based on signal Normally, select "Auto" Programme Edit Prog. Colour Sys. 1 2 3 4 5 CH33 CH21 CH21 CH60 CH21 456 123 XYZ FTP SC1 SC1 SC1 SC1 SC1 Auto Auto Auto Auto Auto Advanced Select the "Colour Sys. " field Select colour system Fine Tuning Use to make small adjustments to the tuning of an individual channel (affected by weather conditions, etc. ) Set channels manually Manual Tuning Manual Tuning Set channel manually after Auto Setup. If a VCR is connected with only the RF cable, select programme position "0". Manual Tuning Programme Fine Tuning Manual Tuning 1 2 78 1 [CH33] 41 Select the programme position 1 4 7 2 5 8 0 VCR Select the channel Search and store search store 3 6 9 23 Control Channel Audience You can lock specific channels and control who watches them. (When a channel is selected, a message appears; by entering the PIN number, you can watch the channel. ) INPUT ASPECT EXIT 1 2 3 Display the menu MENU OK MENU RETURN Select "Setup" Main Menu VIERA Link Picture access OPTION DIRECT TV REC 1 4 7 2 5 8 0 VCR 3 6 9 Sound Setup select Select "Child Lock" Setup Menu 1/2 access TEXT F. P. REC INDEX HOLD VCR DVD PROGRAMME Q-Link Settings Child Lock Tuning Menu Off Timer Language Teletext Shipping Condition Input Labels Banner Display Timeout Access Off FLOF select 3 seconds To return to TV EXIT 4 Child Lock-PIN Entry Set Enter the PIN number (4 digits) 1 of 2 1 4 2 5 8 0 VCR 3 6 9 Please enter new PIN PIN **** 7 · · access select Enter the PIN number twice at first setting. Make a note of the PIN number in case you forget it. Select "Service List" Child Lock Control channel audience Child Lock Change PIN Service List Access Select the channel to be locked Child Lock Service List Wed 12/05/04 10:46 select set 1 7 14 70 72 80 85 90 Service Name BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Lock · · · To cancel Select the locked channel To lock all channels yellow blue Appears when the channel is locked To cancel all channel locks To change the PIN number Select "Change PIN" in and enter a new PIN number twice. · 24 Note Setting "Shipping Condition" (p. 25) erases the PIN number and all settings. Restore Settings Resets the TV to its original condition, i. e. All settings (channels, picture, sound quality, etc. ) are reset. 1 INPUT ASPECT EXIT Display the menu MENU OK MENU RETURN OPTION DIRECT TV REC 2 3 Select "Setup" Main Menu VIERA Link Picture access 1 4 7 2 5 8 0 VCR 3 6 9 Sound Setup select ·· Restore Settings Control Channel Audience Select "Shipping Condition" Setup Menu 1/2 access TEXT F. P. REC INDEX HOLD VCR DVD PROGRAMME Q-Link Settings Child Lock Tuning Menu Off Timer Language Teletext Shipping Condition Input Labels Banner Display Timeout Off FLOF Access 3 seconds select To return to TV EXIT 4 Set Advanced Check the message and initialise Shipping Condition Restore Settings Shipping Condition All tuning data will be erased Are you sure?Are you sure? Confirm EXIT RETURN set Follow the on-screen instructions · re-tune TV channels only, e. g. after moving house To "Auto Setup" will automatically start. 32). · · · · · · · · · · · · · Note HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard. If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable ( 2). When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use COMPONENT-AUDIO terminals). Audio settings can be made on the "HDMI1 Input" menu screen. 20) Applicable audio signal sampling frequencies (2ch L. PCM): 48 kHz, 44. 1 kHz, 32 kHz HDMI2 terminal is for digital audio signal only. If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9". These HDMI connectors are "type A". These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. An equipment having no digital output terminal may be connected to the input terminal of either "Component", "S-VIDEO", or "Video" to receive analogue signals. The HDMI input terminal can be used with only the following image signals: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment. [. . . ] Check an input signal from the equipment. 36) Use an equipment compliant with EIA/CEA-861/861B. TV goes into "Standby mode" Off Timer function is activated. The TV enters "Standby mode" about 30 min. after broadcasting ends. The remote control does not work Are the batteries installed correctly? [. . . ]