User manual PANASONIC TX-39A400B

[. . . ] T0114-0 English ● For the information of the trademarks, refer to [eHELP] (Support > Licence). The illustration for TX-32AS500E / TX-32AS520E is used in this manual unless otherwise mentioned. Contents Illustrations shown may be different depending on the model. Be Sure to Read Important Notice 3 Safety Precautions 4 Quick Start Guide Accessories 6 Connections 8 Identifying Controls 11 First time Auto Setup 13 Using your VIERA Operations 14 How to Use eHELP 15 Others FAQs 16 Maintenance 16 Specifications 17 2 English Important Notice Notice for DVB / Data broadcasting / IPTV functions ● This TV is designed to meet the standards (as of August, 2013) of DVB-T (MPEG2 and MPEG4AVC(H. [. . . ] –■Excessive volume Caution ● Do not expose your ears to excessive volume from the headphones. — If you hear a drumming noise in your ears, turn down the volume or temporarily stop using the headphones. –■Battery for the Remote Control Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. — Replace only with the same or equivalent type. — Do not mix different battery types (such as alkaline and manganese batteries). — Do not expose batteries to excessive heat such as sunshine, fire or the like. ● Make sure you dispose of batteries correctly. — Remove the battery from the unit when not using for a prolonged period of time to prevent battery leakage, corrosion and explosion. LCD Television ■■Ventilation Caution Allow sufficient space around the TV in order to help prevent excessive heat, which could lead to early failure of some electronic components. Minimum distance: 10 10 10 10 (cm) ● Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains. — Whether you are using a base or not, always ensure the vents at the bottom of the TV are not blocked and there is sufficient space to enable adequate ventilation. –■Wireless connection Internet environment Built-in wireless LAN Game equipment Camcorder ■■Amplifier (to listen with speakers) ● Use HDMI2 for connecting an amplifier. This connection is applicable when using an amplifier that has ARC (Audio Return Channel) function. 1 27 3 4 5 6 Bottom side 1 Remote control signal receiver ● Do not place any objects between the TV remote control signal receiver and remote control. 2 Power indicator Red: Standby Green: On ● The LED blinks when the TV receives a command from the remote control. 3 (POWER) ● Switches TV on or off. — To completely turn off the TV, please remove the mains lead from the wall socket. 12 English First time Auto Setup Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time. — These steps are not necessary if the setup has been completed by your local dealer. 8 - 10) and settings (if necessary) of the connected equipment before starting Auto Setup. For details of settings for the connected equipment, read the manual of the equipment. Tick the TV signal mode to tune, and then select [Start Auto Setup] : une (search for the available channels) t :  kip tuning s ● Auto Setup screen varies depending on the country and the signal mode you select. [. . . ] Take care not to tap or scratch the surface with your fingernail or other hard objects. — Do not allow the cabinet and base to make contact with a rubber or PVC substance for a long time. Mains plug Wipe the mains plug with a dry cloth at regular intervals. 0)] DIGITAL AUDIO output PCM / Dolby Digital / DTS, Fibre optic Dimensions (W × H × D) 727 mm × 465 mm × 194 mm (With Base) 727 mm × 432 mm × 67 mm (TV only) Receiving systems / Band name Check the latest information on the available services at the following website. [. . . ]