User manual PANASONIC TX-39AS500B

[. . . ] Note : Follow the on screen instructions for operating the related features. To operate your TV in extreme ambient conditions may cause damage of the device. IMPORTANT - Please read these instructions fully before installing or operating WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. € For ventilation purposes, leave a free space of at least 10 cm all around the set. [. . . ] You can select frequency ranges from next screen. Enter the frequency range manually by using the numeric buttons. when finished , press OK button to start automatic search. Note: Searching duration will change depending on the selected search step. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. Media Playback via USB Input First Time Installation When turned on for the first time, the language selection screen is displayed. Select the desired language and press OK. On the next screen, set your preferences using the navigation buttons and when finished, press OK to continue. Note: Depending on the Country selection you may be asked to set and confirm a PIN at this point. You have to enter it if you are asked to enter a PIN for any menu operation later. You can activate Store Mode option at this point. You can set your Media Player preferences by using the Setup menu. Films are recorded at a different number of frames per second to normal television programmes. Turn this feature on when you are watching films to see the fast motion scenes clearly. Skin tone can be changed between -5 and 5. You can configure the colour temperature values using the RGB Gain feature. Resets the picture settings to factory default settings. This item shifts the image horizontally to the right hand side or left hand side of the screen. This item shifts the image vertically towards the top or bottom of the screen. Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method. [. . . ] No picture • No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control?Also make sure the correct input source has been selected. € Are suitable plugs used to connect the antenna? [. . . ]