User manual PANASONIC TX-39CW304

[. . . ] Note : Follow the on screen instructions for operating the related features. To operate your TV in extreme ambient conditions may cause damage of the device. IMPORTANT - Please read these instructions fully before installing or operating WARNING: Never let people (including children) with reduced physical, sensory or mental capabilities or lack of experience and / or knowledge use electrical devices unsupervised. € For ventilation purposes, leave a free space of at least 10 cm all around the set. [. . . ] Switch the “ ” button to position 2 as illustrated, “ ” so the TV will switch OFF. In the SatcoDX menu, there are two options regarding to the SatcoDx. you can download or upload SatcoDX data. In order to perform these functions a USB device must be connected to the TV. you can upload current services and related satellites & transponders in TV , to a USB device. Additionally you can download one of the SatcoDx files stored in USB device, to the TV. When you select one of these files, all services and related satellites and transponders in the selected file will be stored in the TV. If there are any installed terrestrial, cable and/or analog services, they will be kept and only satellite services will be removed. Afterwards, check your antenna settings and make changes if necessary. An error message stating “No Signal” may be displayed if the antenna settings are not configured properly. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. Pressing the MENU button while in the Media Browser mode will access the Picture, Sound and Setup menu options. Pressing the MENU button English - 9 - TV Menu Features and Functions Picture Menu Contents Mode Contrast Brightness Sharpness Colour Power Save Mode Backlight (Optional) Noise Reduction Dynamic Contrast Colour Temp Picture Zoom You can change the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural. Sets the lightness and darkness values of the screen. Sets the brightness value for the screen. Sets the sharpness value for the objects displayed on the screen. Sets the colour value, adjusting the colors. The backlight function will be inactive if the Power Save Mode is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture mode is set to Game. If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to reduce the amount of noise. Advanced Settings You can change the Dynamic Contrast ratio to desired value. [. . . ] To cancel mute, press the “ ” button, or increase the volume level. Remote control - does not operate • The batteries may be exhausted. Input sources - can not be selected • If you cannot select an input source, it is possible that no device is connected. If not • Check the AV cables and connections if you have tried to connect a device. [. . . ]