User manual PANASONIC TX-L24D35EW

[. . . ] Model No. TX-L24D35ES TX-L24D35EW Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] If there is an update available, a notification banner is displayed when the channel has the update information. To download If you choose not to download EXIT You can update any new software automatically or update manually. 1 2 Display the menu MENU Select [Setup] Main Menu Picture Sound Timer Setup select access 3 Select [System Menu] select System Menu Access access To return to TV EXIT 4 Select [System Update] System Menu System Update Access Updating the TV Software select access Update TV's software system [System Update] To update automatically Select [Auto Update Search in Standby] System Update Auto Update Search in Standby System Update Search Now Off select access / store If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set [Auto Update Search in Standby] to [Off]. Every time you set, the TV automatically performs a search in standby and downloads an update, if any software updates are available. The automatic updating is performed under the following conditions : Standby (TV turned Off with the remote control) Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby System Update Search Now Off Access 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. During software download and update, DO NOT switch Off the TV. The message might be the notification beforehand. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is set to Off. 52 Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. 95 1 2 Select the external input AV Select [PC] Input Selection AV1 AV2 COMPONENT PC HDMI1 HDMI2 TV SD Card/USB select access Corresponding signals p. 103 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting (changed as desired) To make settings "How to Use Menu Functions" (p. 29) Menu White Balance Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff Reset to Defaults Gamma Gamma Reset to Defaults Advanced Settings PC Setup V-pos Adjustments / Configurations (alternatives) Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Press the OK button to reset to the default White Balance Switches the gamma curve [1. 8] / [2. 0] / [2. 2] / [2. 4] / [2. 6] Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Gamma Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Other items For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable (p. 101). Picture Setup Displaying PC Screen on TV Input Resolution Clock H-pos Adjusts horizontal position Adjusts vertical position Clock Phase Sync Reset to Defaults p. 30 - 37 Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted [H & V] / [On Green] [H & V] : by the horizontal and vertical signals from your PC [On Green] : by the green signal from your PC (if available) Press the OK button to reset to the default PC Setup settings Note 53 USB HDD Recording You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. Analogue TV programme cannot be recorded to the USB HDD. The data broadcasting (MHEG, etc. ), radio broadcasting and the periods without any signal will not be recorded. Not all the programmes can be recorded depending on the broadcaster and service provider. For more information of the USB HDD (p. 100) Caution All data in the USB HDD will be erased in the following cases : When formatting the USB HDD with the TV "Setting for USB HDD" (see below) When formatting the USB HDD to use on PC When the TV is repaired due to a malfunction, you may have to format the USB HDD again with the TV to use it. (All data will be erased when formatting. ) In order to use the USB HDD with your PC after recording with this TV, format it again on your PC. (Special operations or tools may be necessary to format on your PC. [. . . ] "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone respectively, and has been certified by the developer to meet Apple performance standards. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. HDAVI ControlTM is a trademark of Panasonic Corporation. "AVCHD" and the "AVCHD" logo are trademarks of Panasonic Corporation and Sony Corporation. [. . . ]