User manual PANASONIC TX-L32C3ES

[. . . ] Model No. TX-L32C3E TX-L32C3ES Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] For reminders to be displayed, the TV must be On. No other channel can be selected while the recording of Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 30) are completed, no setting of the recorder is required. If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder. For preparations of a recorder, read the manual of the recorder. Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition. 2 minutes before the starting time, a reminder message appears if you are watching TV. To remove the message and start the programming To cancel the programming EXIT SD CARD MENU ASPECT INPUT TV AV N DIRECT TV REC EXIT 1 Select the mode you want to set (DVB-C or DVB-T) (p. 14) TV Timer Programming 2 OPTION RETURN Display the menu MENU TEXT STTL INDEX HOLD 3 Select [Setup] Main Menu Picture Sound Setup select access abc ghi pqrs jkl tuv def mno wxyz LAST VIEW 4 Select [Timer Programming] Setup Menu Timer Programming Off Timer Link Settings Child Lock DVB-C Tuning Menu Language Display Settings Common Interface System Menu Access Off 1/2 select access To return to TV EXIT To unlock the tuner and stop recording EXIT 41 Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function ([Ext Rec. ] or [Reminder]) select [Ext Rec. ] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. 2 minutes before the starting time, a reminder message appears if you are watching TV. [Reminder] : to remind watching the programme When you are watching TV, a reminder message appears 2 minutes before the start time. Press the OK button to switch to the programmed channel. 3 Set the channel, date and time (repeat the operations as below) Set items in the order of 1 to 4. select the item set ghi pqrs 1, 3 and 4 can also be entered with numeric buttons. abc jkl tuv def mno wxyz : Displayed if the timer programming events are overlapped Records with subtitles (if available) To indicate this (yellow) (Press again to remove subtitles) Timer Programming Function Reminder Ext Rec. D D C Wed 27. 10. 2010 10:46 Channel Name 7 BBC7 <TIMER> 1 BBC1 <TIMER> 3 ITV1 <TIMER> --- No. Date Wed 27. 10. 2010 STTL Wed 27. 10. 2010 Thu 28. 10. 2010 --/-- Start End 17:00 18:30 (90 min. ) 18:00 20:00 (120 min. ) 21:30 22:30 (60 min. ) --:---:-- Timer Programming Ext Rec. --- 1 2 3 4 Duration (automatic display) [C] : DVB-C [D] : DVB-T You cannot change the mode within the menu. 1 Channel number 2 Date one day ahead daily or weekly (press repeatedly) 3 Starting time 4 Ending time [Daily Sun-Sat] : Sunday to Saturday [Daily Mon-Sat] : Monday to Saturday [Daily Mon-Fri] : Monday to Friday [Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun] : Same time on the same day every week 4 Store 42 To change a timer programming event Select the programme to be changed select Correct as necessary (p. 42) access To record with subtitles (if available) Select the programme to record with subtitles (yellow) Each time pressed : auto off To cancel a timer programming event Select the programme to be deleted (red) To cancel a timer programming event temporarily Select the programme to be cancelled (blue) Each time pressed : cancel stop cancelling Note Check that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs : You press the OK button to view the programme or the EXIT button to cancel the reminder. The timer programming event that the reminder is set for ends. "!" identifies that any timer programming events have overlapped. [. . . ] This is not a malfunction. An error message appears Follow the message's instructions. If the problem persists, contact your local Panasonic dealer or the authorized Service Centre. 73 Specifications TX-L32C3E, TX-L32C3ES Power Source Rated Power Consumption Standby Power Consumption Dimensions (W × H × D) Mass Display panel Sound Aspect Ratio Visible screen size Number of pixels Speaker Audio Output Headphones AC 220-240 V, 50Hz 88 W 0. 3 W 10. 2 W (With monitor out recording) 779 mm × 531 mm × 207 mm (With Pedestal) 779 mm × 497 mm × 84 mm (TV only) 9. 5 kg Net (With Pedestal) 8. 5 kg Net (TV only) 16:9 80 cm (diagonal) 697 mm (W) × 392 mm (H) 1, 049, 088 (1, 366 (W) × 768 (H)) (160 mm × 42 mm) × 2, 8 : 20 W (10 W + 10 W), 10% THD M3 (3. 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' PAL D, K, SECAM D, K PAL 525/60 M. NTSC DVB-T DVB-C Aerial input Operating Conditions VHF / UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R6 - R12 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R3 - R5 UHF E21 - E69 Receiving Systems / Band name Check the latest information on the available services at the following website. (English only) http://panasonic. jp/support/ global/cs/tv/ Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. NTSC Video recorders (VCR) Digital terrestrial services (MPEG2 and MPEG4-AVC(H. 264)) Digital cable services (MPEG2 and MPEG4-AVC(H. 264)) NTSC (AV input only) Playback from NTSC Video recorders (VCR) Specifications 74 AV1 (SCART) AV2 input COMPONENT input HDMI 1 / 2 input Card slot DIGITAL AUDIO OUT Connection Terminals 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO AUDIO L - R Y PB, PR RCA PIN Type × 1 RCA PIN Type × 2 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] 1. 0 V[p-p] (75 :) 0. 5 V[rms] TYPE A Connectors HDMI2 : HDMI (Version 1. 4 with Audio Return Channel), This TV supports "HDAVI Control 5" function. SD Card slot × 1 Common Interface slot (complies with CI Plus) × 1 PCM / Dolby Digital / DTS, Fiber optic Note Design and Specifications are subject to change without notice. [. . . ]