User manual PANASONIC TX-L32UX3E

[. . . ] Model No. TX-L32UX3E Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] 35) To return to TV EXIT Skip unwanted Analogue channels, Edit Analogue channels [Channel List] You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide Analogue Channel List 1 2 3 4 5 6 7 BBC1 ***** ***** ***** ***** ***** ***** select [Reveal] / [Hide] : [Reveal] : [Hide] (skip) To reveal all channels (yellow) 39 To edit channels You can also edit each channel in Channel List. To retune each channel ([Manual Tuning]) (red) (see below) To move the channel position Select the new position (green) Store (green) To rename the channel name Set characters (maximum : five characters) (blue) Edit channel name Name A U a u BCD VWX bcd vwx E Y e y FGHI Z 01 fghi z()+ J 2 j K 3 k . lmnopqr *_ S : s T # t Store select set RETURN To use numeric buttons "Characters table for numeric buttons" (p. 70) Channel position Channel name 3 ITV itv CH23 23:35 All Analogue Channels Note If a VCR is connected only with the RF cable, edit [VCR]. Set Analogue channel manually [Manual Tuning] [Fine Tuning] Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc. ) Tuning and Editing Channels (Analogue) [Manual Tuning] Set Analogue channel manually after Auto Setup. Set [Sound System] and [Colour System], and then perform this function. If a VCR is connected only with the RF cable, select channel position [0]. Analogue Manual Tuning 1 BBC1 Fine Tuning Manual Tuning Sound System Colour System CH33 2 78 1 SC1 Auto 41 SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F : SECAM L, L' 1 Select the channel position abc ghi pqrs jkl tuv def mno wxyz 2 Select the channel 3 Search and store search store 40 Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. This function is not available in Analogue mode. Timer Programming can store up to 15 events. Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On. No other channel can be selected while the recording of Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 30) are completed, no setting of the recorder is required. If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder. [. . . ] If the problem persists, contact your local Panasonic dealer or the authorized Service Centre. 73 Specifications TX-L32UX3E Power Source Rated Power Consumption AC 220-240 V, 50Hz 94 W 0. 3 W Standby Power Consumption 11. 5 W (With monitor out recording) Dimensions (W × H × D) 779 mm × 531 mm × 207 mm (With Pedestal) 779 mm × 497 mm × 84 mm (TV only) Mass Aspect Ratio Visible screen size Number of pixels Speaker Sound Audio Output Headphones 9. 5 kg Net (With Pedestal) 8. 5 kg Net (TV only) 16:9 80 cm (diagonal) 697 mm (W) × 392 mm (H) 2, 073, 600 (1, 920 (W) × 1, 080 (H)) (160 mm × 42 mm) × 2, 8 : 20 W (10 W + 10 W) M3 (3. 5 mm) stereo mini Jack × 1 PAL B, G, H, I, SECAM B, G, SECAM L, L' VHF E2 - E12 VHF A - H (ITALY) CATV (S01 - S05) CATV S11 - S20 (U1 - U10) VHF R1 - R2 VHF R3 - R5 VHF H1 - H2 (ITALY) UHF E21 - E69 CATV S1 - S10 (M1 - M10) CATV S21 - S41 (Hyperband) VHF R6 - R12 UHF E21 - E69 Display panel Receiving Systems / Band name Check the latest information on the available services at the following website. (English only) http://panasonic. jp/support/ global/cs/tv/ PAL D, K, SECAM D, K PAL 525/60 M. NTSC NTSC (AV input only) DVB-T DVB-C Playback of NTSC tape from some PAL Video recorders (VCR) Playback from M. NTSC Video recorders (VCR) Playback from NTSC Video recorders (VCR) Digital terrestrial services (MPEG2 and MPEG4-AVC(H. 264)) Digital cable services (MPEG2 and MPEG4-AVC(H. 264)) Specifications Aerial input Operating Conditions VHF / UHF Temperature : 0 °C - 35 °C Humidity : 20 % - 80 % RH (non-condensing) 74 AV1 (SCART) AV2 input COMPONENT input HDMI 1 / 2 input Card slot DIGITAL AUDIO OUT Connection Terminals 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) VIDEO AUDIO L - R Y PB, PR RCA PIN Type × 1 RCA PIN Type × 2 1. 0 V[p-p] (including synchronization) ±0. 35 V[p-p] 1. 0 V[p-p] (75 :) 0. 5 V[rms] TYPE A Connectors HDMI2 : HDMI (Version 1. 4 with Audio Return Channel), This TV supports "HDAVI Control 5" function. SD Card slot × 1 Common Interface slot (complies with CI Plus) × 1 PCM / Dolby Digital / DTS, Fiber optic Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. [. . . ]