User manual PANASONIC TX-L47E5B

[. . . ] Model No. TX-L32E5B TX-L37E5B TX-L42E5B TX-L47E5B Operating Instructions LCD Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. English UK and Ireland model TQB0E2222 Features DVB-T tuner built-in Receives DVB (Digital Video Broadcasting) digital terrestrial broadcasts. DVB-T2 tuner built-in DVB-T2 is an advanced digital terrestrial system for more efficient transmission. [. . . ] 82) 1 2 Select the external input Select [PC] Input Selection AV1 AV2 PC HDMI1 HDMI2 HDMI3 HDMI4 TV SD Card/USB select access Corresponding signals (p. 91) If [H-freq. ] or [V-freq. ] is shown in red, the signals may not be supported. PC menu setting To make settings "How to Use Menu Functions" (p. 32) Menu Item Input Resolution Adjustments / Configurations (options) Switches to a wide view: VGA (640 × 480 pixels) / WVGA (852 × 480 pixels) / XGA (1, 024 × 768 pixels) / WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Clock Displaying PC Screen on TV Adjusts horizontal position H-pos PC Setup Other items For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 90). Setup Adjusts vertical position V-pos Clock Phase Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted [H & V] / [On Green] [H & V]: by the horizontal and vertical signals from your PC [On Green]: by the green signal from your PC (if available) Press the OK button to reset [PC Setup] to the default settings Sync Reset to Defaults (p. 33 - 39, 56) Note 55 Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode. To use this function completely, set [Advance(Calibration)] to [On] in the Setup Menu. 39) For PC input mode, some functions are available without setting [Advance(Calibration)]. 1 Display the menu and select [Picture] select Picture access 2 Select [Viewing Mode] and set the mode select Viewing Mode Dynamic access / store 3 Select [Advanced Settings] select Advanced Settings Access access Adjust the detailed picture settings [Advanced Settings] Advanced Settings White Balance Colour Management Gamma Access Access Access select adjust access / store [Colour Management] is available when [Viewing Mode] in the Picture Menu is set to [True Cinema]. Advanced Picture Settings Menu White Balance Advanced Settings Colour Management Item R-Gain, G-Gain, B-Gain R-Cutoff, G-Cutoff, B-Cutoff Reset to Defaults R-Hue, G-Hue, B-Hue R-Saturation, G-Saturation, B-Saturation R-Luminance, G-Luminance, B-Luminance Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red / green / blue area Adjusts the white balance of dark red / green / blue area Press the OK button to reset to the default White Balance Adjusts the picture hue of red / green / blue area Picture Adjusts the saturation of red / green / blue area Adjusts the luminance of red / green / blue area Press the OK button to reset to the default Colour Management Switches the gamma curve [1. 8] / [2. 0] / [2. 2] / [2. 4] / [2. 6] Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Gamma Gamma Gamma Reset to Defaults 56 Using Media Player Media Player allows you to enjoy photo, video or music recorded on an SD Card and a USB Flash Memory. VIERA IMAGE VIEWER is the function of the easy viewing for photos or videos recorded on an SD Card on the TV screen by simply inserting into the SD Card slot. Photo mode: Still pictures recorded by digital cameras will be displayed. Video mode: Moving pictures recorded by digital video cameras will be played back. Music mode: Digital music data will be played back. During the operation, audio signal is output from AV1, DIGITAL AUDIO OUT and HDMI2 (ARC function) terminals. AV1 can output audio signal if [AV1 out] is set to [Monitor] in the Setup Menu (p. To use HDMI2 with ARC function, connect an amplifier that has ARC function (p. [Date] shows the date on which the recording was made by the recording equipment. The file without record of the date is shown "**/**/****". The picture may not appear correctly on this TV depending on the recording equipment used. Display may take some time when there are many files and folders. Partly degraded files might be displayed at a reduced resolution. Picture setting may not work depending on the conditions. The folder and file names may be different depending on the digital camera or digital video camera used. To insert or remove the SD Card / USB Flash Memory USB Flash Memory Insert or remove straightly and completely. [. . . ] Playback from M. NTSC Video recorders (VCR). Playback from NTSC Video recorders (VCR). VHF A - J CATV S1 - S20 UHF E21 - E69 CATV S21 - S41 (Hyperband) DVB-T PAL I PAL 525/60 M. NTSC NTSC (AV input only) UHF Playback of NTSC tape from some PAL Video recorders (VCR) or NTSC disc playback from DVD player and recorder. Playback from M. NTSC Video recorders (VCR). [. . . ]