User manual PANASONIC TX-P42ST50Y

[. . . ] Model No. TX-P42ST50Y TX-P50ST50Y TX-P55ST50Y Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] Normally encrypted channels will appear. If encrypted channel does not appear, perform below. For more details, read the manual of the CI module, or check with the broadcaster. 1 2 Select DVB-C or DVB-T (p. 20) Display the menu and select [Setup] select Setup access Using Common Interface 3 Select [Common Interface] select Common Interface Access access 4 Access Common Interface and follow the on-screen instructions Common Interface Slot 1: Module inserted On-screen instructions may not correspond to the remote control buttons. 57 Shipping Condition Resets the TV to its original condition, i. e. All settings other than [USB HDD Setup] are reset (channels, picture, sound settings, etc. ). after moving house "Retuning from Setup Menu" (p. 46, 47) 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [Shipping Condition] System Menu Shipping Condition Access select access Restore Settings [Shipping Condition] 1 Check the message and initialise Shipping Condition All tuning data will be erased Are you sure ?Are you sure ? 2 Follow the on-screen instructions 1 (Confirm) Reset to Factory Shipping Condition Completed. Do not turn off Shipping Condition 2 (Confirm) [Auto Setup] will automatically start. 15) 3 (Start [Shipping Condition]) 58 Updating the TV Software A new version of software may be released for download to enhance the performance or operations of the TV. If there is an update available, a notification message is displayed when the channel has the update information. To download (Press the EXIT button not to download) You can update new software automatically or update manually. 1 Display the menu and select [Setup] select Setup access 2 Select [System Menu] select System Menu Access access 3 Select [System Update] System Menu System Update Access select access Update TV's software system [System Update] To update automatically System Update Auto Update Search in Standby Off System Update Search Now Updating the TV Software Select [Auto Update Search in Standby] select access / store Every time you set, the TV automatically performs a search in Standby and downloads an update, if any software updates are available. The automatic updating is performed under the following conditions: · Standby (TV turned off with the remote control) · Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. If System Update is performed, the software will be updated (it may change TV functions). If you do not want to do so, set [Auto Update Search in Standby] to [Off]. To update immediately 1 Select [System Update Search Now] System Update Auto Update Search in Standby Off Access System Update Search Now 2 Searches for an update (for select access several minutes) and displays a corresponding message if any 3 Download Note Download may take for about 60 minutes. During software download and update, DO NOT switch off the TV. The notification message might be a reminder. In this case, the schedule information (the date that the new version can be used) will appear. The update will not start when the TV is off. 59 Advanced Picture Settings You can adjust and setup the detailed picture settings for each input and Viewing Mode. To use this function completely, set [Advance] to [On] in the Setup Menu. 44) 1 2 Select the input mode to adjust and setup (p. 20, 29) Display the menu and select [Picture] select Picture access 3 Select [Viewing Mode] and set the mode select Viewing Mode Dynamic access / store 4 Select [Advanced Settings] select Advanced Settings Access access Adjust the detailed picture settings [Advanced Settings] Advanced Settings White Balance Colour Management Gamma Access Access Access select adjust access / store [Colour Management] is available when [Viewing Mode] in the Picture Menu is set to [True Cinema]. Advanced Picture Settings Menu White Balance Advanced Settings Colour Management Item R-Gain, G-Gain, B-Gain R-Cutoff, G-Cutoff, B-Cutoff Reset to Defaults R-Hue, G-Hue, B-Hue R-Saturation, G-Saturation, B-Saturation R-Luminance, G-Luminance, B-Luminance Reset to Defaults Gamma Gamma Reset to Defaults Adjustments / Configurations (alternatives) Adjusts the white balance of bright red / green / blue area Adjusts the white balance of dark red / green / blue area Press the OK button to reset to the default White Balance Adjusts the picture hue of red / green / blue area Adjusts the saturation of red / green / blue area Picture Adjusts the luminance of red / green / blue area Press the OK button to reset to the default Colour Management Switches the gamma curve [S Curve] / [1. 8] / [2. 0] / [2. 2] / [2. 4] / [2. 6] Please note the numerical values are reference for the adjustment. Press the OK button to reset to the default Gamma 60 USB HDD Recording You can record the digital TV programmes to the connected USB HDD and enjoy playing back in various ways. [. . . ] Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. (b) Content owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. [. . . ]