User manual PANASONIC TXP42V20BA

[. . . ] Model No. TX-P42V20BA TX-P50V20BA Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. "B" or "B" model no. [. . . ] select The automatic updating is performed at night under the following conditions: · Standby (TV turned Off with the remote control) · Recording of Timer Programming, Direct TV Recording or One Touch Recording is not in progress. If System Update is performed, the software will be updated (it may change TV functions). If you do not wish to do so, set "Auto Update Search in Standby" to "Off". The notification banner will keep appearing during the period of new software availability, usually 2 to 3 days. Download To update immediately System Update Auto Update Search in Standby System Update Search Now Off Access Select "System Update Search Now" access select Searches for an update (for several mins. ) and displays a corresponding message if any Download may take up to 60 mins. During software download and update, DO NOT perform any operations on the TV or switch Off the TV. Note 59 Multi Window Enjoy viewing the digital TV programme and external input (AV, COMPONENT or HDMI) at once. MENU 1 2 3 Display the menu MENU Select "Picture" Main Menu Picture Sound Setup access select Select "Picture in Picture" Picture Menu Picture in Picture Picture Display Reset to Defaults 2/2 Access On Reset access select 1 DVB Remote control operations apply to the main screen. AV1 EXIT PandP Swap Main screen Sub screen How to operate in multi window Picture-in-Picture mode (PinP) 1 DVB Display the colour bar if it is not displayed Picture-and-Picture mode (PandP) 1 DVB AV1 TV AV1 yellow green EXIT PinP Swap EXIT PandP Swap blue AV1 1 DVB EXIT PandP Swap Colour bar red To exit multi window To change the input mode or channel of sub screen Swap sub screen for main screen blue Change the input mode or channel by the remote control (p. 28) Swap again blue Each input mode can only be displayed either on main screen or sub screen. The sound comes from only the main screen in multi window. You cannot change the aspect ratio in multi window. This function cannot be used with PC, Media Player or Network services. Some signals are reformatted for suitable viewing on your display. If main screen has digital teletext signals, some key words may appear on the colour bar. In this case the Note 60 operations can be performed by using colour buttons on the remote control except when the colour bar is displayed by pressing the button. Displaying PC Screen on TV The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected. To connect PC p. 94 INPUT TV AV 1 2 Select the external input AV Select "PC" Input Selection AV1 AV2/S AV3 COMPONENT PC HDMI1 HDMI2 HDMI3 HDMI4 TV Media Server Displaying PC Screen on TV Multi Window access select Corresponding signals p. 100 If "H-freq. " or "V-freq. " is shown in red, the signals may not be supported. To return to TV TV PC menu setting To make settings Advanced Settings PC Setup Menu Item R-Gain G-Gain B-Gain R-Cutoff G-Cutoff B-Cutoff "How to Use Menu Functions" to (p. 31) Adjustments / Configurations (options) Adjusts the white balance of bright red area Adjusts the white balance of bright green area Adjusts the white balance of bright blue area Adjusts the white balance of dark red area Adjusts the white balance of dark green area Adjusts the white balance of dark blue area Switches the gamma curve (S Curve / 1. 8 / 2. 0 / 2. 2 / 2. 4 / 2. 6) Gamma Please note the numerical values are reference for the adjustment. Reset to Defaults Press the OK button to reset to the default Advanced Settings Switches to a wide view VGA (640 × 480 pixels), WVGA (852 × 480 pixels), Input Resolution XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels) Options change depending on signals Set to the minimum level if noise occurs Clock Adjusts horizontal position Other items Note For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable (p. 98). Picture Setup Advanced H-pos Adjusts vertical position V-pos Eliminates flicker and distortion Adjust after Clock adjustment Set to the minimum level if noise occurs Chooses another synchronous signal if the image is distorted (H & V / On Green) H & V : by the horizontal and vertical signals from your PC Sync On Green : by the green signal from your PC (if available) Reset to Defaults Press the OK button to reset to the default PC Setup settings Clock Phase p. 32 - 36 61 Advanced Picture Settings You can adjust and setup the detailed picture settings for each Viewing Mode. To use this function completely, set "Advance(isfccc)" to "On" in the Setup Menu. 35 For PC input mode, some functions are available without setting "Advance(isfccc)". Select the input mode to adjust and setup INPUT TV AV MENU EXIT 1 2 3 4 p. [. . . ] 300 Mbps IEEE802. 11g / IEEE802. 11a: Max. 11 Mbps Infrastructure mode WPA2-PSK (TKIP / AES) WPA-PSK (TKIP / AES) This device supports WPA and WPA2 encryption. WEP (64 bit / 128 bit) 44 mm × 27 mm × 72 mm 29 Net Transfer rate (standard) Access Mode Security Dimensions (W × H × D) Mass MAC address and Product Identification Marking are located on the bottom of the Wireless LAN Adaptor. Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment. Design and Specifications are subject to change without notice. [. . . ]