User manual PANASONIC TX-P50ST30E

[. . . ] Model No. TX-P42ST30E TX-P46ST30E TX-P50ST30E Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance. [. . . ] To retune each channel ([Manual Tuning]) · · (red) (see below) To move the channel position Select the new position (green) Store (green) · To rename the channel name (blue) A U a u Set characters (maximum : five characters) Edit channel name Name B b v CD c w d x E Y e y F Z f z g ( GH 0 h ) I 1 i + J 2 j K 3 k . r S : s T # t VWX Store select set BACK/ RETURN use numeric · To "Characters buttons numeric buttons" (p. 98) table for Channel position Channel name 1 ITV CH23 SC1 23:35 All Analogue Channels · If a VCR is connected only with the RF cable, edit [VCR]. Set Analogue channel manually [Manual Tuning] [Fine Tuning] Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc. ) Note [Manual Tuning] Set Analogue channel manually after Auto Setup. Set [Sound System] and [Colour System], and then perform this function. If a VCR is connected only with the RF cable, select channel position [0]. Tuning and Editing Channels (Analogue) · · Analogue Manual Tuning 1 BBC1 Fine Tuning Manual Tuning Sound System Colour System CH33 2 78 1 SC1 Auto Store 41 SC1 : PAL B, G, H / SECAM B, G SC2 : PAL I SC3 : PAL D, K / SECAM D, K F : SECAM L, L' 1 Select the channel position abc ghi pqrs jkl tuv def mno wxyz 2 Select the channel 3 Search 4 Select [Store] select store 52 Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. This function is not available in Analogue mode. Timer Programming can store up to 15 events. Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or service provider. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On. No other channel can be selected while the recording of Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 40) are completed, no setting of the recorder is required. If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of the recorder. For preparations of a recorder, read the manual of the recorder. Recordings to the external recorders are always in standard definition composite video via SCART, even if the original programme is in high definition. 2 minutes before the starting time, a reminder message appears if you are watching TV. · · · · · · · · · · · To remove the message and start the programming · To cancel the programming EXIT 1 Select the mode you want to set (DVB-C or DVB-T) (p. 18) TV Timer Programming 2 3 Display the menu MENU Select [Timer] Main Menu Picture Sound Timer Setup select access To return to TV EXIT 4 EXIT Select [Timer Programming] select Timer Programming Off Timer Auto Standby Access Off Off To unlock the tuner and stop recording IDE GU access 53 Set timer programming event details [Timer Programming] 1 Start making the settings 2 Select the function ([Ext Rec. ] or [Reminder]) select [Ext Rec. ] : to record the programme to the external recorder When the start time comes, the channel will be switched automatically and the video and audio signals will be output. [. . . ] LLC in States and a trademark · HDAVI ControlTM is"AVCHD" logo of Panasonic Corporation. are trademarks of Panasonic · "AVCHD" and the trademark. · x. v. ColourTM is aunder license from Dolby Laboratories. · Manufactured double-D symbol are trademarks of Dolby Laboratories. [. . . ]