User manual PANASONIC TXP50U20B

[. . . ] Model No. TX-P42U20B TX-P50U20B Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. suffix denotes UK model. English U. K. [. . . ] "Characters table for numeric buttons" (p. 66) Confirm green To move the channel green Select the new position or abc def mno wxyz Select the turn ghi pqrs jkl tuv Store RETURN Advanced Channel position numbers (known as logical channel numbers) can be swapped in Channel List. To swap the channel position number "Channel List" (below) Note Skip unwanted DVB channels, Edit DVB Channels Channel List You can hide unwanted DVB channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide All DVB Channels 70 CBBC Channel 72 Cartoon Nwk 105 BBCi 719 BBC Radio Wales 720 BBC Radio Cymru 1 BBC ONE Wales 7 BBC THREE reveal / hide select : reveal : hide (skip) To reveal all channels yellow To edit channels You can also edit each channel in Channel List. Select a channel to edit and: Channel position number 1 BBC ONE Wales Coronation Street 19:30 - 20:00 Now 19:35 All DVB Channels Select favourites For info press To retune each channel - Manual Tuning (p. 38) (only for the revealed channels) (logical channel number) red abc def mno wxyz To swap the channel position number green Enter the new position number ghi pqrs jkl tuv Store green 39 Tuning and Editing Channels Update DVB channel automatically Update Channel List You can add new channels, delete removed channels, update channel name and position automatically to Channel List. DVB Update Channel List Progress Analogue Scan This will take about 3 minutes. CH CH 21 Channel Name Type 68 Quality Channel List is updated while keeping your settings in Favourites Edit, Channel List, Child Lock, Timer Programming, etc. Free TV: 0 Pay TV: 0 Searching Radio: 0 Data: 0 Display a notification message New Channel Message Selects whether to give a notification message when a new DVB channel is found. Press EXIT to ignore. Selecting OK will perform "Update Channel List". Check DVB signal Signal Condition Selects a channel and checks the DVB signal condition. DVB Signal Condition Channel Name Signal Quality Signal Strength Bit Error Rate Network Name Parameter 70 CBBC Channel 0 0 0. 00E+00 Wenvoe [CH62] 802 MHz 10 10 To change the channel A good Signal Strength is not an indication of best signal for DVB reception. Please use the Signal Quality indicator as follows: Signal Quality: Green bar Good Yellow bar Poor Red bar Bad (Check the Terrestrial aerial) (Analogue) You can retune channels or skip unwanted channels, edit channels etc. INPUT TV MENU EXIT 1 2 3 4 5 Select Analogue TV Display the menu MENU Select "Setup" Main Menu Picture Sound Setup access RETURN select Select "Analogue Tuning Menu" Setup Menu Timer Programming Off Timer Link Settings Child Lock Analogue Tuning Menu Display Settings System Menu Other Settings abc ghi pqrs jkl tuv def mno wxyz access Off Access select Select one of the following functions Analogue Tuning Menu Channel List Auto Setup Manual Tuning access Access Access Access select To return to TV EXIT Auto Setup "Retuning from Setup Menu" (p. 37) 40 6 Set Skip unwanted Analogue channels, Edit Analogue channels Channel List You can hide unwanted Analogue channels. The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels. Select a channel and reveal / hide Analogue Channel List 1 BBC1 2 ***** 3 ***** 4 5 6 7 reveal / hide select : reveal : hide (skip) To reveal all channels yellow To edit channels You can also edit each channel in Channel List. Select a channel to edit and: Channel position Channel name 3 ITV itv CH23 Mute Encrypted Radio 23:35 All Analogue Channels Tuning and Editing Channels For info press AD Subtitles TXT Multi Audio 45 To retune each channel - Manual Tuning (below) To move the channel position To rename the channel name green red Select the new position Store green blue Set characters one by one (maximum: five characters) Edit channel name Name A U a u B V b v C W c w D X d x EFG YZ efg yz( H I JKLMNOPQRST 0123456789!:# h i j k lmnopqr s t )+-. *_ . !:# ghi pqrs Store RETURN select set 1 4 7 abc jkl tuv 2 5 8 0 def mno wxyz 3 6 9 You can set characters by using numeric buttons. "Characters table for numeric buttons" (p. 66) Advanced If a VCR is connected only with the RF cable, edit "VCR". Set Analogue channel manually Manual Tuning Set Analogue channel manually after Auto Setup. If a VCR is connected only with the RF cable, it is recommended to select channel position "0". Analogue Manual Tuning 1 BBC1 Manual Tuning 21 CH33 68 Note Select the channel position abc ghi pqrs jkl tuv def mno wxyz Select the channel Search and store search store 41 Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. 19). the TV must be On. Timer Programming can store up to 15 events. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, No other channel can be selected while Ext Rec. It may not be possible to record an encrypted programme (which is copy-protected). [. . . ] NTSC (AV input only) Playback from NTSC Video recorders (VCR). Aerial input UHF Temperature : 0 °C - 35 °C Operating Conditions Humidity : 20 % - 80 % RH (non-condensing) AV1 (SCART terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link) AV2 (SCART terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link) VIDEO RCA PIN Type × 1 1. 0 V[p-p] (75 ) AV3 AUDIO L - R RCA PIN Type × 2 0. 5 V[rms] Y 1. 0 V[p-p] (including synchronization) COMPONENT VIDEO PB, PR ±0. 35 V[p-p] TYPE A Connectors HDMI1 : HDMI (Version 1. 3 with x. v. ColourTM) HDMI 1 / 2 HDMI2 : HDMI (Version 1. 4 with Audio Return Channel) , x. v. ColourTM Others This TV supports "HDAVI Control 5" function. SD Card slot × 1 Card slot Common Interface slot × 1 AUDIO L - R RCA PIN Type × 2 0. 5 V[rms] (high impedance) Output DIGITAL PCM / Dolby Digital, Fiber optic AUDIO OUT 1, 029 mm × 704 mm × 334 mm (With Pedestal) 1, 218 mm × 814 mm × 401 mm (With Pedestal) Dimensions (W × H × D) 1, 029 mm × 661 mm × 93 mm (TV only) 1, 218 mm × 769 mm × 93 mm (TV only) 31. 0 k Net (With Pedestal) 25. 0 k Net (With Pedestal) Mass 23. 0 k Net (TV only) 29. 0 k Net (TV only) Power Source Rated Power Consumption Sound Connection Terminals Display panel Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. [. . . ]