User manual PANASONIC TX-P65VT30B

[. . . ] Model No. TX-P55VT30B TX-P65VT30B Operating Instructions Plasma Television Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. The images shown in this manual are for illustrative purposes only. English UK and Ireland model TQB0E2148 Features 3D technology Viewing 3D images on the Full HD panel You can enjoy viewing 3D images on this TV by wearing the 3D Eyewear. RealD 3D This TV and 3D Eyewear use the 3D technology of RealD. [. . . ] Other Satellite Manual Tuning · Set tuning parameters for the required satellite, details can usually Transponder Frequency 10773 Polarisation Horizontal be found in a satellite TV magazine. Symbol Rate (Ksym/s) Auto Start Scan 61 Timer Programming Timer Programming from Menu The Timer Programming menu allows you to choose programmes that you wish to remind watching or record to the external recorder, the USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel automatically to record even if the TV is in Standby mode. TV Guide may also be used to set timer programming event (p. · Timer Programming can store up to 15 events. · For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On. · No other channel can be selected while the recording of Timer Programming is in progress. · It may not be possible to record an encrypted programme (which is copy-protected). · When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV. If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 45) are correct, no setting of the recorder is required. · If the recorder is not compatible with Q-Link or similar technologies, set the timer of the recorder in addition to the Timer Programming on the TV. For preparations of a recorder, read the manual of the recorder. · For more information of the USB HDD / SD Card Recording. 74, 116) · Recordings to the external recorders are always in standard definition composite video via SCART, even if the original programme is in high definition. 1 2 Timer Programming Select the tuner you want to use (p. 19) Display the menu Select [Timer] Main Menu Picture 3 To return to TV To unlock the tuner and stop recording select access Sound Timer Setup 4 Select [Timer Programming] Timer Programming Off Timer Auto Standby Access Off Off select access · Check that the LED is orange. If not, timer programmes are not active or not stored. · Timer Programming reminder messages will remain displayed until one of the following occurs : Note · You press the OK button to view the programme or the EXIT button to cancel the reminder. · The timer programming event that the reminder is set for ends. · "!" identifies that any timer programming events have overlapped. [Ext Rec. ], [USB HDD Rec. ] and [SD Card Rec. ] are given priority over [Reminder]. As for the overlapped two or more [Ext Rec. ] / [USB HDD Rec. ] / [SD Card Rec. ], the first timer programming event starts and finishes as programmed. [. . . ] 500 (charging the fully depleted battery) Main body : Resin Lens section : Liquid crystal glass Materials The battery deteriorates after repeated use, and the operation time eventually becomes short. Number of charging cycles may decrease depending on the operating conditions. During the long period of disuse, charge fully once every 6 months to keep the performance. The figures above are at shipping from the factory, and are not a guarantee of performance. [. . . ]