User manual PANASONIC TX-R26LX70

[. . . ] Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Warnings and precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Operating This Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Fitting remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Controls the gain of the received signal, which can differ between stations. Pressing setting). STR after having adjusted some feature will store the setting as the default (replacing the factory 13 Tuning menu Programme edit Use this setting when changing setting of receiving channels or changing the channel display. Turn the TV and sellect the broadcast channel. Follow the steps below to display the Programme edit screen. Selecting the Programme edit on the Tuning menu. Access to the Programme edit screen 1 2 SET UP Press to display the Setup menu screen. Tuning menu Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Access Press to select the Tuning menu. Press to access the Tuning menu screen. Auto 3 Press to select the Program edit. Return Press to access the Program edit screen. Programme edit Prog. 1 2 3 4 5 : : : : : Change Programme Select Option TV/AV Exit 'STR' Button Stare Chan. - Name Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Delete Add Move Programme edit 1 Press to select the Programme position. Return Change Programme Select Option TV/AV Exit 'STR' Button Stare Press to select the prog. , Chan. , Name, Lock, Sys. Programme edit Prog. 1 2 3 4 5 : : : : : Chan. - Name Lock Off Off Off Off Off Sys SC1 SC1 SC1 SC1 SC1 Note: · When the cursor enters the Name field, it will move character-by-character up to five before moving to the next field. Delete Add Move 2 The keys function in accordance with the position of the cursor: prog. , Chan. , Name, Lock or Sys. Cursor position Prog. Function of keys Moves the Programme position. Red, Green, Yellow, and Blue Bars are displayed at the bottom of the screen. These have the same functions as the Red, Green, Yellow, and Blue keys on the remote control. (see next page) Sets the number of channels to be displayed. The characters that can be input are displayed at the bottom of the screen. Select the characters required and input. (When receiving a channel while Lock On is selected, the volume will be muted and the screen be black and display "Programme is locked". ) Select from SC3, SC2, SC1 and F. Chan. Turn the TV on and select the broadcast channel. Follow the step on the previos page to disply the Tuning menu screen. (From the On screen Display menu) It is possible on individual programme position. Tuning menu 1 Press to select the Manual tuning. Press to access the Manual tuning screen. Programme edit Auto setup Manual tuning Fine tuning Colour system Volume correc. Access Auto 2 Press to select the desired Programme Number. Programme down / up Serch down / up TV/AV E x i t 'STR' Button Stare Press to search the higher or lower channel. Return 3 4 STR When the desired station is found, press to store. This returns the set to the normal viewing condition. Manual tuning 02 99:21 41 TV/AV Search Start. (Via side panel) 1 Press 3 1 2 4 (Side panel) until Tuning mode is reached. or to access Tuning mode. 2 Press 3 Press 4 Press to move between Change programme, search and TV system. or to change programme position or start search. to store. When the desired station is found, press The programme position will flash. (LCD TV Set) Repeat above procedure to tune additional programme positions. Press Manual tuning (Side panel) -, + TV/AV STR F : : : : Search Move cursor Store To exit at any time to exit the Tuning menu. 02 99:21 41 Helpful Hint (1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the "Colour System Selection" operation on page 22. (2) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as indicated in the instruction manual of VCR and to set the designated channel to programme No. In that case, perform manual tune after setting the colour system in advance. Further, in multi-system VCR, it is more convenient to set the designated channel to several programme Numbers. 19 Tuning menu Fine tuning Under normal reception conditions this function is not required or necessary. However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality. 1 Press to select the Fine tuning. [. . . ] If the top of the page indicates that sub pages are being transmitted yet the page does not change, then the number at the top of the page is there to indicate that the broadcaster has updated the page's contents, there are no sub Yellow pages. SET UP Press followed by the Blue button; T will be displayed at the top right of the screen. Enter desired sub page number before the T disappears. (If in List mode, a `T' will appear in the current box at the bottom). SET UP (Press , Yellow in List mode). When the page is available, press the Yellow button to view the page. To clear the page perform one of the following: SET UP · Press . TV/TEXT · Select a new page number. [. . . ]