User manual PANASONIC UB-5838C

[. . . ] Operating Instructions Electronic Board Model No. [Stand (option)] [Wall-mounting] UB-5838C UB-5338C The unit in this picture is UB-5838C. (Stand kit is optional. ) Installation Manual Included (for qualified service personnel) · To assemble this unit, please refer to the Installation manual on page 38 through 55. · Before operating this unit, please read these instructions completely and keep them carefully for future reference. · This unit is designed for installation by a qualified servicing dealer. [. . . ] Release the lock A and fold back the fallprevention extension legs B as follows: A A B Using 3 Release the caster locks and move the unit. Releasing the lock Note · Always move the unit with 2 people. 4 Lock the casters and set the fall-prevention extension legs. Locking the casters (Push this side) Push to lock 5 Plug-in the power cord on both ends. 23 Setting the Unit The following settings can be made using the control panel. Note · The item "Setting the number of copies" is displayed at the top of the set-up menu only when the printer is connected. Setting for scanning time display It is possible to select whether the time that an image is scanned is displayed on the image. Setting the number of copies It is possible to set the number of copies (1 to 9) when making multiple copies with a printer. Electronic Board Electronic Board 1 Press the Set-up Key . · The set-up screen is displayed and the multiple copy setting for printers is selected. [On] [Off] . 1 Press the Set-up Key · The set-up screen is displayed. 2 3 Press the Advance Key ( ) repeatedly to select the desired number of copies. ) to return to standby Note · The item "Setting the number of copies" is displayed at the top of the set-up menu only when the printer is connected. Note · Scanning can be started immediately by pressing the Start/Stop Key instead of the Mode Key ( ). 2 Press the Set-up Key ( the following item. ) repeatedly to select 24 Setting the Unit 3 Press the Advance Key ( ) repeatedly to select (On) or (Off). · When the scanning time display is set to "off", the following screen is displayed. File format set-up It is possible to select the file format for outputting images to a USB flash memory device, SD memory card or computer. 1 4 Press the Mode Key ( mode. ) to return to standby Press the Set-up Key . · The set-up screen is displayed. Using 2 Press the Set-up Key ( the following item. ) repeatedly to select 3 Press the Advance Key ( ) repeatedly to select (PDF) or (JPEG). · When PDF is selected, all images are saved as PDF files. · When JPEG is selected, all images are saved as JPEG files. 4 Note Press the Mode Key ( mode. ) to return to standby · When JPEG is selected, images will be rotated 90 degrees and saved. Use a graphic software to rotate the image back to the position it was displayed on the screen. 25 Setting the Unit Setting for Full Size Scanning (UB-5838C only) When images are scanned in full size mode, they are stretched and enlarged in order to utilize the entire space of a page. Setting the current time It is possible to set the current time for the unit clock. 1 Press the Set-up Key . · The set-up screen is displayed. Electronic Board Electronic Board [Full size] . [Regular size] 1 Press the Set-up Key 2 Press the Set-up Key ( the following item. ) repeatedly to select · The set-up screen is displayed. 2 Press the Set-up Key ( the following item. ) repeatedly to select 3 Press the Advance Key ( ). · The time set-up screen is displayed. Select the desired setting you wish to change by pressing the Advance Key ( ) repeatedly. The value of each setting can be changed by pressing the Set-up Key ( ). 3 4 Press the Advance Key ( select (Regular) or Press the Mode Key ( mode. ) repeatedly to (Full size). ) to return to standby · By pressing the Start/Stop Key repeatedly, it is possible to change the date format as follows: "D/M/Y" "M/D/Y" "Y/M/D" *D: Day / M: Month / Y: Year 4 Press the Mode Key ( ) to set the time and return to standby mode. 26 Setting the Unit Setting the Password To prevent third parties from operating the unit, it is possible to set the unit to require a password to be entered when the power is turned on or after a certain period of time has passed. 6 Press the Set-up Key ( password settings. ) and determine the · If the password setting has been set to "off", the unit will return to standby mode. · If the password setting is set to "on", proceed to perform the following operations. 1 Press the Set-up Key . · The set-up screen is displayed. 7 Press the Advance Key ( ) and set the interval of time after which the password will need to be entered. Using 2 Press the Set-up Key ( the following item. ) repeatedly to select · The interval for entering the password can be selected from 15 minutes / 30 minutes / 1 hour / 2 hours / 4 hours / 8 hours. 8 9 3 4 5 Press the Advance Key ( ). If the password has already been set, enter the 4-digit password. Press the Advance Key ( ) repeatedly to select (Password on) or (Password off). Press the Set-up Key ( ) and determine the interval for entering the password. When the password input display appears, press the Mode Key ( ), the Set-up Key ( ), or the Advance Key ( ) to enter the new 4-digit password and return to standby mode. Note · Do not forget the Password. If you forget the Password, call your dealer. 27 Setting the Unit Testing the Printer By performing the Test Print feature, it is possible to clean the printer head from this unit when scanned images are not printed correctly (ex. Once the printer head is cleaned, the following pattern will be printed. If the pattern is printed as shown below, the problem has been fixed. If the pattern is not printed as shown below, refer to the manual of the printer for details. 3 4 Note Press the Advance Key ( ). · The printer head is cleaned and the pattern shown above is printed. ) to return to standby · If the test pattern is not printed correctly, it is time to replace the ink cartridge. Refer to the manual of the printer and replace the ink cartridge. · For information regarding available printers, refer to the following site: http://panasonic. net/pcc/support/eboard/ ub-5838c_info. htm · This pattern is printed in color. 1 Press the Set-up Key . · The set-up screen is displayed. 2 Press the Set-up Key ( the following item. ) repeatedly to select · If this item is not displayed, the unit does not recognize the printer. Make sure that the printer is connected properly. 28 Daily Care and Maintenance Always turn off the power switch and unplug the power plug when cleaning the unit. Caring for the Eraser When the erasing surface of the eraser becomes dirty, hold down the sheet under the top sheet with your finger and peel off the dirty sheet (white or gray sheet) by pulling in the direction of the arrow. Cleaning the Screen and the Unit Gently wipe the screen film and unit with a waterdampened cloth that has been thoroughly wrung. White or gray sheet Note · Be sure to peel off only one sheet; white or gray sheet of the eraser. [. . . ] · Refer to "Assembling the unit" (page 40). 50 Wall-Mounting Construction Wall Types and Installation Procedures The method for attaching the wall-mounting fixtures to the wall will vary depending on the nature of the wall's structure. Three available options are listed below. Other methods may be necessary depending on the wall. Metal or Concrete walls Stud plugs (sold in stores) are needed. Drill bit Drill eight holes in the wall. [. . . ]