User manual PANASONIC UBT81W

[. . . ] Operating Instructions (For Basic Operations) Electronic Board (elite Panaboard) Model No. UB-T781 UB-T781W UB-T761 UB-T781 Stand is sold separately. Installation Manual Included (for qualified service personnel) · To assemble this unit, please refer to the Installation Manual on pages 37 through 60. · Before operating this unit, please read these instructions completely and keep them carefully for future reference. · This unit is designed for installation by a qualified servicing dealer. [. . . ] will become misaligned in the following cases, requiring you to re-calibrate their positions. ­ The location of the projector changed. ­ The location of the elite Panaboard changed. ­ The image area or placement was changed due to changes in the zoom, focus, etc. ­ The resolution of the projector or the computer changed. If you are using the elite Panaboard installed on a stand, be aware that accidentally hitting the elite Panaboard or pushing too strongly with the electronic pen while operating can move the stand's position, which will result in misalignment of the projected image and the electronic pen's position. Make sure to lock the stand's casters when using the elite Panaboard, as failing to do so can cause misalignment. · Do Not Look Directly into the Projector Lamp · When using a projector, try to avoid looking directly into the projector lamp. Doing so can hurt your eyes. · 24 Operating Instructions (For Basic Operations) Usage Starting the elite Panaboard software and Performing Calibration 1. Connect the elite Panaboard to your computer with the USB cable. · The elite Panaboard software starts automatically. · When you start the elite Panaboard software for the first time, the calibration screen is displayed. · Restart your computer if you are prompted to do so. After the computer has restarted, connect the elite Panaboard to your computer with the USB cable. Press the electronic pen at a right angle against the board at the intersecting points of each circle until it disappears (about 2 seconds). Repeat in the order shown in the illustration below. · · · · Hold and press the electronic pen at a right angle to the screen board. When you push down on the penpoint, the electronic pen makes a buzzing sound. When the position of the indicated point has been determined correctly, calibration automatically moves to the next point. When calibration has finished normally, a completion dialog box is displayed. 1 A B 5. · If the elite Panaboard and projector are fixed so that they will not move (Wall mounted case), select the [Always use this calibration information. ] check box, and click [OK] to skip calibration from the next time you start the elite Panaboard software. D E C Operating Instructions (For Basic Operations) 25 Usage · After calibration has completed, the icon is displayed in the notification area, and the Desktop Drawing Tool is automatically displayed. Uninstalling the elite Panaboard software If it is necessary to uninstall the elite Panaboard software, follow the procedure below. Turn on your computer and start Windows. · Log into an account with Administrator privileges. Select [Add or Remove Programs] from the Control Panel. [. . . ] Confirm operation by writing on the screen board with the electronic pen and checking that the writing is displayed on the computer's screen. (Your writing with the electronic pen will not appear on the screen board itself. ) Operating Instructions (For Basic Operations) 57 Installation Manual Repackaging To repackage the elite Panaboard, perform steps in "Assembling the elite Panaboard" (For Wall Mounting ® page 52, For Mounting on a Stand (Sold Separately) ® page 55) in reverse. Package the unit as depicted in the diagram in "Preparing for Removing the elite Panaboard from Its Packaging" (page 51). Notice · When handling the screen board, hold it by the frame and not the screen board itself. [. . . ]