User manual PANASONIC UF-S10

[. . . ] Unauthorized copying and distribution is a violation of law. The contents of these Operating Instructions are subject to change without notice. Table of Contents Getting to Know Your Machine Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Precaution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Function Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (See page 37) 69 Basic Operations Making Copies Your machine has a copy function which can make single or multiple copies. 1 Set document(s) face down. ENTER STATION(S) THEN PRESS START 00% 2 3 4 Enter the number of copies. OF COPY=10 * STORE * NO. 005 PAGES=001 01% * COPY * NO. OF COPY=01/10 The machine stores the document, then prints the copies. NOTE 1. The copy will be reduced automatically depending on the length of the original document. If you wish to be prompted for the reduction ratio when making copies, change the setting of Fax Parameter No. 32 (COPY REDUCTION) to "Manual". (See page 37) If Copy Reduction is set to Manual, press and to set the zoom ratio in 1% steps. If you make a copy with Super Fine resolution, it will be reduced slightly even if the reduction ratio is set to 100% in order to fit the data on one page. You can change the Contrast and Resolution without Standard Resolution in Copy Mode. If you experience a memory overflow error while making copies, you may turn "Off" the Memory XMT feature temporarily by pressing FUNCTION However, the printed copies will not be collated. 8 9 SET 1. 70 Advanced Features Timer Controlled Communications General Description You can send a document to one or multiple stations at any preset time within the next 24 hours. Up to 10 built-in timers can be set for deferred transmission and deferred polling. Deferred Transmission 1 Set document(s) face down. ENTER STATION(S) THEN PRESS START 00% 2 3 4 5 1 1 DEFERRED COMM. (See Note 3) Ex: 4 3 2 1 POLLED PASSWORD=4321 * STORE * NO. 015 PAGES=001 01% * STORE * COMPLETED TOTAL PAGES=005 24% The document(s) will be stored into memory. NOTE 1. You can still send or receive documents even when set to be polled. Only 1 polled file can be stored in memory. If you need to add document(s) into the same polled file, see page 88. If you have set the polling password in Fax Parameter No. 26, the password will appear on the display. You can still change the password temporarily by overwriting it with a new one. 74 Polling To Poll Documents from Another Station The following procedure lets you poll a document from one or multiple stations. Be sure to set the polling password before polling. (See page 73) 1 2 3 4 5 1 3 POLLING NO. = 1:POLLING 2:POLLED POLLING PASSWORD=1234 Enter a 4-digit polling password. (See Note 2) Ex: 1 1 1 1 POLLING PASSWORD=1111 ENTER STATION(S) THEN PRESS START Dial by any combination of the following methods: · One-Touch Dialing · Abbreviated Dialing · Manual Number Dialing, press SET after each station is entered (Up to 12 stations) · Directory Search Dialing, press SET after each station is entered (For details, see pages 48 to 50. ) Ex: <01>(Station name) 5551234 6 * STORE * NO. 001 NOTE 1. You can review the entered stations in step 5 by pressing or key, press CLEAR to erase the displayed station or group as needed. [. . . ] A 4-digit password that is checked before a document is received. Relates to the number of dots scanned or printed per certain square. The quality of the image increases as the number of dots per certain square increases. A function that can be set so that your unit will receive from only those machines programmed into your dialer. [. . . ]