User manual PANASONIC VDR-D160EE

[. . . ] If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Warning Do not remove the cover (or back); there are no user serviceable parts inside. Refer servicing to qualified service personnel. IF THE POWER CORD OF THIS EQUIPMENT IS DAMAGED, IT MUST BE REPLACED WITH AN ELECTRICALLY APPROVED POWER CORD. Keep the Memory Card out of reach of children to prevent swallowing. IEC 60825-1:2001 CAUTION This product contains a laser diode of higher class than 1. [. . . ] When you delete scenes, use a battery with sufficient battery power or use the AC adaptor. It may not be possible to delete scenes that have been divided. Combine the divided scenes, and then delete them. 65 LSQT1052 Editing To complete editing LSQT1052(ENG). book 66 Editing scenes Dividing a scene This is for dividing a scene into two. (RAM) (-RW<VR>) To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ EDIT SCENE] # [ DIVIDE] and press the joystick. 2 Select the scene to be divided, then press the joystick. The selected scene is played back. 3 When you reach the area where you want to divide the scene, move the joystick down to set the dividing point. Using slow-motion playback or frame-by-frame playback makes it easy to search for the point where you want to divide the scene. (l 60) Editing LSQT1052 4 When the confirmation message appears, select [YES], then press the joystick. To continue dividing other scenes Repeat steps 2-4. To complete editing Press the MENU button. 66 LSQT1052(ENG). book 67 Editing scenes Combining scenes This function is only for combining two consecutive scenes into one. (RAM) (-RW<VR>) ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ EDIT SCENE] # [ COMBINE] and press the joystick. 2 Select the scene to be combined, then press the joystick. The selected scene and the next scene are combined. If you wish to combine scenes that are not next to each other or scenes with different recording dates, first create a playlist and then combine the scenes on the playlist. (l 69, 74) 3 When the confirmation message appears, select [YES], then press the joystick. To continue combining other scenes Repeat steps 2-3. To complete editing Press the MENU button. 67 LSQT1052 Editing LSQT1052(ENG). book 68 Using playlists Using playlists What is a playlist? You can create a playlist by gathering your favourites from the recorded scenes. Since the playlist is not created by copying data, you will consume little of the disc capacity by making a playlist. If you create or delete playlists, the original scenes will not be modified. Editing scenes on a playlist will not affect the original scenes. To continue combining other scenes Repeat steps 4-5. To complete editing Press the MENU button. 74 LSQT1052(ENG). book 75 Using playlists Deleting scenes Deleting scenes on a playlist will not affect the original scenes. Deleting scenes one at a time: ¬ Select playlist playback mode. (l 70, steps 1 and 2) 1 Press the button during playback. 2 When the confirmation message appears, select [YES], then press the joystick. Deleting multiple scenes from the thumbnail display: ¬ Select playlist playback mode. (l 70, steps 1 and 2) 1 Press the MENU button, then select [ press the joystick. EDIT] and 75 LSQT1052 Editing 2 Select the playlist to be edited, then press the joystick. LSQT1052(ENG). book 76 Using playlists 3 Select [ DELETE] # [ press the joystick. SELECT] or [ ALL] and When [ALL] is selected, the selected playlist will be erased. Proceed to step 6. 4 (Only when [SELECT] is selected in step 3) Select the scene to be deleted, then press the joystick. The selected scene is encircled by a yellow frame. When the joystick is pressed again, the selected scene will be cancelled. Up to 8 scenes displayed on a page can be set in succession. 5 (Only when [SELECT] is selected in step 3) Press the button. 6 When the confirmation message appears, select [YES], then press the joystick. (Only when [SELECT] is selected in step 3) To continue deleting other scenes Repeat steps 4-6. To complete editing Press the MENU button. Deleting scenes on a playlist will not increase the remaining capacity for recording. The playlist itself is deleted if you delete all the scenes in it. When a playlist is deleted, the number of each subsequent playlist decreases by one. It may not be possible to delete scenes that have been divided. Combine the divided scenes, and then delete them. LSQT1052 Editing 76 LSQT1052(ENG). book 77 Editing still pictures Editing still pictures Deleting still pictures This is for deleting still picture files recorded on SD cards. (SD) The deleted files cannot be restored. Deleting files one at a time ¬ Rotate the mode dial to select . 1 Press the button during playback. 2 When the confirmation message appears, select [YES], then press the joystick. 77 LSQT1052 Editing LSQT1052(ENG). book 78 Editing still pictures Deleting multiple files from the thumbnail display ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [ DELETE] # [ SELECT] or [ ALL] and press the joystick. When [ALL] is selected, all files on the SD card except the locked files will be erased. [. . . ] Adjusts so that the vertical lines of a subject are seen more clearly. Attempts to bring an object with higher contrast into focus. Due to these characteristics, auto focus does not work correctly in the following situations. Record pictures in the manual focus mode. [. . . ]