User manual PANASONIC VL-WD613EX

[. . . ] ) You must register this product with your Video Intercom System before it can be used. R This manual describes only the steps needed to register and begin using the product. Please read the Operating Instructions of the Video Intercom System for further details. R The illustrations in the supplied manual(s) may vary slightly from the actual product. [. . . ] Hospitals or health care facilities may be using equipment that could be sensitive to external RF (radio frequency) energy. R Do not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction, resulting in an accident. R Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. 90 GHz, and the RF transmission power is 250 mW (max. ) CAUTION Preventing fire and electric shock R Do not use the product in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that have excessive dust. Preventing accidents, injuries, and property damage R Do not use the product in unstable areas or areas prone to strong vibrations. This may cause the product to fall, resulting in damage to the product or injury. R Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment. R Do not place coins or other metal objects in the charger. metal objects may become hot , causing burns. R See the Operating Instructions of the Video Intercom System for information about cautions in regards to using the product and the installation environment. R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. caution: R Risk of explosion if battery is replaced by incorrect types. Dispose of used batteries according to the instructions. Repairing, transferring, disposing, or returning the product Requesting repairs for the product R Note that the settings of the product may be altered or changed to the default settings during repairs. Note for product disposal, transfer, or return R Perform the "Initialize" setting for the product. (® See the Operating Instructions of the Video Intercom System. ) Settings are returned to their default values when initialization is performed. These symbols (A, B, C) on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. [. . . ] R Wipe the ends of batteries ( , ) with a dry cloth. R Avoid touching the ends of batteries ( , ) or the unit contacts. Icon High Medium Low Needs charging R See page 6 for a guide on operating times for the sub monitor. Note: R When the sub monitor is off the charger or the AC adaptor is disconnected for 1 week or more, remove the batteries in order to maintain battery performance and prevent the batteries from discharging. [. . . ]