User manual PANASONIC WH-MDF12C6E5

[. . . ] Children should be supervised to ensure that they do not play with the appliance. Do not install the unit in a potentially explosive or flammable atmosphere. Do not insert your fingers or other objects into the outdoor unit, rotating parts may cause injury. Do not touch the outdoor unit during lightning, it may cause electric shock. [. . . ] Some functions may not be applicable to your unit. Simultaneously for 5 seconds to enter special setting mode. To enable YES or disable NO function, or set your desired day and time. Solar Priority (YES / NO) To choose the solar use for water tank heat up. Heating Priority (YES / NO) To choose the heat pump only use for Heating side during HEAT + TANK mode. During sterilization Sterilization Day & Time Set to prevent burnt or To set timer for sterilization (only once a week). Sterilization Continue Time To set timer to maintain heating temperature in order to complete the sterilization function (5minutes ~ 1hour). Using the remote control could set the temperature range for water outlet temperature and outdoor ambient temperature. When unit is ON, operation LED is lit and the actual temperature for water outlet and outdoor ambient are shown on the remote control display. - In this mode, the outdoor unit will provide heating capacity to the system. â· HEAT + TANK MODE - In this mode, the outdoor unit will provide heating capacity to the sanitary tank and the system. - This operation is not used when the sanitary water tank is not installed. - In this mode, the outdoor unit will provide heating capacity to the sanitary tank. Press for 5 seconds to enter "SETTING" mode. Repeat steps 2 to 5 to set other parameters. This operation reduces outdoor unit noise. In this condition, it may cause decrease in heating capacity. The backup heater provides extra heating capacity during cold outdoor temperature and only can operated at heat mode operation. â· The backup heater will automatically turn ON when the setting conditions is fulfilled. STATUS mode cannot be activated when the "SETTING" indicator is ON. Or wait 30 seconds to exit "SETTING" mode. "SETTING" mode cannot be activated when the "PUMPDW" and "STATUS" indicator is ON. [. . . ] Om te zorgen dat de unit optimaal functioneert moet men op regelmatige intervallen seizoensinspecties aan de unit, het externe filter en de veldbedrading uitvoeren. These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC. By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. [. . . ]