User manual PANASONIC WH-SHF12F6E5

[. . . ] 86-99 F569378 Table of contents Safety precautions …………………………… 3-5 To adjust initial settings ……………………… 6-7 How to use ………………………………… 8-12 Cleaning instructions ………………………… 12 Troubleshooting ……………………………13-14 Information …………………………………… 15 Thank you for purchasing Panasonic product. Before operating the system, read these operating instructions thoroughly and keep them for future reference. Before use, make sure the system has been installed correctly by an authorised dealer according to the given instructions. €¢ Panasonic Air-to-Water Heatpump is a split system, consisting of two units: indoor and outdoor units. [. . . ] Monday ~ 12 Sterilisation Day & Time To set timer for sterilisation. operates even under a standby condition) 0:00 ~ 23:50 13 Sterilisation Temperature 40 °C ~ 75 °C To set the temperature of sterilisation. 5 minutes ~ 14 Continuation of Sterilisation To maintain heating temperature in order to complete the sterilisation. 1 hour 15 Base Pan Heater To select whether or not to connect to the optional base pan heater. yES NO Note: If NO is selected , menu 16 is skipped. 16 Base Pan Heater type Type A - The base pan heater activates only during deice operation. 1 day ~ 99 days Do not use this menu for any other purposes and in period other than during construction (Refer to Information page). –  Note: • The current day and time need to be set in cases below: - When the power is turned on for the first time. - A long time has elapsed since the power was turned on the last time. €¢ The current time that has been set will be the standard time for all the timer operations. Caution Indicator (Tank Temperature above 60 °C) To adjust initial settings English 7 How to use User The system is turned off by an external switch. Turn on or off the system Press When the system is ON, the operation LED is lit and the actual water outlet temperature and outdoor ambient temperature are shown on the display. €¢ The outdoor unit provides heat to the indoor unit. HEAT • The outdoor unit provides heat to the + TANK sanitary tank and indoor unit. €¢ This mode cannot be selected when the sanitary water tank is not installed. tANK • The sanitary water tank is either turned ON or OFF. €¢ The outdoor unit provides heat to the sanitary water tank. The operation may cause heating ability to decrease. user User Initiate the backup heater Press . €¢ The backup heater provides extra heat at low outdoor temperature. The backup heater is possible only in the heat mode. €¢ Once the backup heater is set, it is automatically operated when conditions are fulfilled. [. . . ] If a power failure occurs, the data kept from last hour will be displayed. Loud refrigerant noise continue for a • It is caused by protection control during deice operation at outdoor ambient temperature lower than -10 °C. Check the following before calling for servicing. Operation LED is not lit or nothing is displayed on the control panel. [. . . ]