User manual PANASONIC WV-CW860

[. . . ] Colour CCTV Camera Model No. WV-CW860 WV-CW864E Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ITALIANO ESPAÑOL FRANÇAIS DEUTSCH Operating Instructions ENGLISH ENGLISH VERSION We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC. Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC. Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC. [. . . ] Move the cursor to POSI O, and press the CAM (SET) key. The area title position appears on the monitor screen. If needed, change the display position by using the joystick, and press the MON (ESC) key. An area title always appears under the camera ID. If the camera ID and an area title are set to be shown in separate positions, the area title appears above the camera ID. Move the cursor to RET, and press the CAM (SET) key. The SPECIAL 1 menu appears again. ZOOM/FOCUS setting menu ** DIRECTION(NESW) PAN/TILT PUSH PUSH ZOOM/FOCUS POSI U ZOOM D/L FOCUS + N ** SET SET R RET Display Position setting menu FLOOR 1 N Setting [ON (USER)] If ON (USER) is selected on the SPECIAL 1 menu, the Area Title selection menu appears. The screen has a number column and title column above RET and RESET. Note: An area number followed by an asterisk * has already been preset. To select a camera direction, move the cursor to the desired number, and press the CAM (SET) key. The direction menu of the selected number appears. Adjust PAN/TILT, ZOOM/FOCUS and display the position in the as same way as AREA TITLE, DIRECTION (NESW). To add a user-customized title, move the cursor to the title of the desired number, and press the CAM (SET) key. The AREA TITLE menu of the selected number appears. Move the cursor to the desired character in the character field using the joystick, and press the CAM (SET) key. The selected character appears in the editing field and the blinking cursor moves one position to the right. Repeat steps 1 and 2 until one area title is completed. Move the cursor to POSI O, and press the CAM (SET) key. The area title appears on the monitor screen. If needed, change the display position by using the joystick, and press the MON (ESC) key. Special 1 menu ** SPECIAL PRIVACY ZONE PROPO. P/T AREA TITLE PATROL ALARM IN/OUT PASSWORD LOCK CLEANING EL-ZOOM PRESET ALM IMAGE HOLD RET 1 ** OFF(ENB) ON ON(USER) STOP OFF OFF ON OFF OFF AREA TITLE (USER) selection menu ** AREA TITLE(USER) ** 1* NORTH 2 3 EAST 4 SOUTH-EAST 5 SOUTH 6 SOUTH-WEST 7 8 NORTH-WEST RET RESET DIRECTION (USER) setting menu ** DIRECTION(USER) 1 ** PAN/TILT PUSH SET ZOOM/FOCUS PUSH SET + NORTH RET DEL 29 To Quit Editing · To return to the AREA TITLE menu, move the cursor to RET, and press the CAM (SET) key. · To cancel one area title, move the cursor to RESET in the AREA TITLE menu, and press the CAM (SET) key. · To return to the SPECIAL 1 menu, move the cursor to RET, and press the CAM (SET) key. [. . . ] 6. 0 s (FAR/NEAR) in manual mode automatic (open/close is possible)/manual 1 : 1. 6 (WIDE) - 3. 0 (TELE) 3. 79 - 83. 4 mm 2. 6 ° - 51. 7 ° 2. 0 ° - 39. 9 ° 1/50 (OFF), 1/120, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, 1/10 000 s ON (LOW)/ON (MID)/ON (HIGH)/OFF max 32 times, AUTO/FIX selectable ON/OFF (SETUP MENU) x 22 +digital zoom x10 F1. 6 - 22, CLOSE 24 V AC, 50 Hz 18 W, (59 W at heater ON) 220 V - 240 V AC, 50 Hz 18 W, (61 W at heater ON) WV-CW860 -30 °C - +50 °C (­22 °F - 122 °F) * See note. 200 mm (D) x 360 mm (H) (7-7/8" (D) x 14-3/16" (H)) approx. 5 kg (11 lbs) * Note: The picture quality and camera performance are not guaranteed until the inside temperature rises up to ­10°C (14°F). 58 Auto focus Auto mode Auto pan key Digital flip Camera ID Motion DET Alarm IN Alarm OUT B/W mode Privacy zone Proportional PAN/TILT Patrol Cleaning Image Hold Panning range Panning angle setting Panning mode Panning speed Tilting range Tilting mode Tilting speed Controls MANUAL/AUTO OFF/SEQ/SORT/AUTO PAN/PATROL SEQ/SORT/AUTO PAN/PATROL PLAY ON/OFF preset ID, camera ID, area title : up to 16 characters ON/OFF 4 inputs (ALARM IN 1 - 4) 2 outputs (ALARM/AUX1, B/W/AUX2) AUTO/ON/OFF ON/OFF, up to 8 zones ON/OFF LEARN/PLAY/STOP, up to 30 seconds ON/OFF ON/OFF 360 ° endless possible (in auto-pan mode) manual/sequential position/sort position/auto pan manual : approx. 0. 1 °/s - 120 °/s 8-steps/64-steps sequence position : maximum approx. [. . . ]