User manual PANTECH G500

[. . . ] CHARACTERISTIC SPECIFICATION Display Dual clamshell TFT LCD both Main&Sub. Main LCD : 260, 000 TFT Color Display (128 X 160) Sub LCD : 260, 000 TFT Color Display (128 X 128) Melody 64 Polyphonic Ringtone Camera High Resolution Built-in Camera (310K Pixels) Dimension & Weight 85*41*22mm with Slim Battery 90g with Slim Battery Performance Talk time: up to 210minutes (with 780 mAh Battery) Standby time:up to 200 hours (with 780 mAh Battery) Operating Frequency GSM 900MHz / DCS 1800MHz Dual Band Some of the contents in this User Manual would differ from that in your phone. It may differ depending on the S/W version and the network provider you subscribed to. 1 CAUTION Please check and follow simple guidelines below for your safety and proper operation of the phone. CAUTION MEDICAL DEVICES Switch the phone off in hospitals. Follow any regulations or rules of the hospital. Switch the phone off to avoid interference with pacemaker, or even other medical devices. [. . . ] There are Red, Blue, Green, and Dark gray including default color. Contrast You can set Main LCD Brightness, Main LCD contrast, Sub LCD contrast. Subscreen option(Sub LCD setting) 1 Screen option You can select from 3 options; User define image, Analog clock, and Normal image. Voice equalizer ; On/Off Auto backlight This activates the sub-LCD regularly when the phone is closed. Use Navigation [ ][ ]Keys to move up and down to the mode you want to change and then use Navigation [ ][ ]keys to change the value. Each has 8 levels. 60 61 SETTINGS Backlight You can set the Light Level of Main Sub LCD. SETTINGS Date&Time ® T ® T 1 Use Navigation [ ][ ]Keys to move up and down to the mode you want to change and then use Navigation [ ][ ]keys to change the value. 1. Light level(Off, Low, Medium, High, Maximum) A. You can set the brightness of LED Back light . Set time Press [ ]key after you input the time you wish to set 2. Minimal bright(Off, Low, Medium, High, Maximum) A. You can set the brightness of the LED Back light while it is off after the Light Duration is expired. (This value cannot be higher than the value of Light Level). 3. The duration of the LED Backlight when the phone is left idle. (Always off, On for 5 secs, On for 10 secs, On for 20 secs, Always on) Set date Setting up the present date Press [ ]key and store when you move the cursor to the date you wish to set. 62 63 SETTINGS Set time zone Showing the world wide time differences with present time. SETTINGS Language Select the language to be displayed. Press [ you want. ]key and store when you choose the time zone Choose one from the lists, and press [ <Information> when choosing Automatic, it chooses the Language Preference stored in your SIM. ] key. Display Reset setting Restore the default values for the settings. Set the time format as 12 hour or 24 hour. Set the date format as D:M:Y, M:D:Y, or Y:M:D. Choose the display as Time only, Date only, or Date & Time. Press [ ]key to save preferred options. Input the handset password, and press [ ]key when the "Restore factory setting?" pop up shows, the default values are restored into, and then the phone reboots. 64 65 SETTINGS Information SETTINGS Software version To check the software version, press [ software version is displayed ] and the Own number You can input, edit, store, and delete your own phone number. Auto power alarm If there is no number stored, "List empty" message appears. Press [ ] key o edit & add your own number. With the number(s) listed, press [ want. 1. Edit :modify and edit the number. <Information> you can input up to 2 Own numbers . If the phone is off with this function on, it automatically turns on to ring at the saved time. ] key and select a menu you 66 67 NET SERVICES Some of the functions in this section are network dependant. Therefore, please check with your network provider whether they support these services. NET SERVICES When busy Calls are diverted when your handset is already connected to anothercall. Divert calls Divert calls - With this option, you can forward your incoming calls to number In case you want to divert call, the call waiting function needs to be setted earlier. All calls Divert all calls. -You can all voice calls, data, fax and messages to another number. On : Select ON to forward all the services provided by the network, voice calls, data, fax, and messages. If you select "On", you should enter a number to which you wish to direct. After entering the number, you should enter a waiting time just before directing a call and press [ ] to send the configuration to the network. Off : Select OFF to cancel "Divert All Calls". Status : STATUS shows the current configuration, ON or OFF. By service : You can use your handset to divert a specific type of call to another number if your network supports this feature. "All services" [ ] enables all calls to divert and you can choose one of the services, "Voice calls"[ ], "Data" [ ], "Fax"[ ] or "Messages"[ ]. [. . . ] Contact your service provider. 116 117 SAFETY INFORMATION Road Safety Remember, road safety always comes first. Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone, park the vehicle before conversing. Always secure the phone in its holder;do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. [. . . ]