User manual PANTECH G700

[. . . ] CHARACTERISTIC SPECIFICATION Display Clamshell LTPS Color LCD Main LCD : 65, 000 LTPS Color Display (128 X 128) Animation messages, Icons Melody 16 Poly MIDI Sound Dimension & Weight 42*80*22. 8mm and 76. 5g Performance Talk time: up to 180 minutes (with 700 mA internal battery) Standby time: up to 200 hours (with 700 mA internal battery) Operating Frequency GSM 900MHz / DCS 1800MHz / PCS 1900MHz Triple Band 1 FOR YOUR SAFETY For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided. For detailed information, please refer to the Appendix. Antenna Do not use any antenna not authorized by Pantech. Using such antenna may cause malfunction or serious damage to the phone. [. . . ] <Caution!> All values stored in the handset such as messages, addresses and alarm will be deleted. However, the messages and addresses stored in SIM will remain undeleted. Software version You can confirm the Software version of phone you currently use. Information Auto power alarm Own number You can input, save, and edit your own Phone numbers. If no number has been saved before, you will see "List empty". At this state press [ ] to have an edit window where you can edit numbers. Then the numbers will be saved the phone. You can also check by pressing [ ] and then [ ]key in idle mode. 56 In this mode, the phone turns on if it is turned off at the time of alarm to go off and turns off again after setting the alarm off. In this mode, the alarm does not go off if when the phone is turned off 57 NET SERVICES Divert calls Diverts calls to another number according to user's settings. NET SERVICES When busy All calls Call diversion when line is busy This diverts calls to another number set when a user's line is busy. The procedure of setting this is the same as the one explained in 1. 1. Divert all calls ­ Sets other numbers to be diverted for voice call, receiving data, fax, message service. On : This sets call diversion for all calls. If you press On, the screen saying "Input a number to be diverted" will appear. Press [ ] button to find and set the number saved in the Phonebook. After inputting a number to be diverted press the [ ] button. Off : This cancels the setting of "Call diversion for all calls". Status : This indicates the current settings. By service : You can set call diversion for all 4 services [ ], or set call diversion for each service [ ][ ][ ] [ ]. You can also select all services except for messages by pressing [ ]. On no answer Call diversion when you do not take calls This diverts calls to another number set when you can not take calls within the set time. After inputting a number to be diverted press the [ ] button. Then the screen saying "Input transfer time ranged from 5 to 30 seconds" will appear. After that press the [ ] button to be transferred to the network. 58 59 NET SERVICES When not found NET SERVICES Call Settings This sets additional functions used for making or taking calls. Call diversion when you are out of the coverage service zone This diverts calls to another caller set when you are out of range. The procedure of setting this is the same as the one explained in 1. 1 Answer type Sets the incoming call receiving mode. [. . . ] If unavoidable to use the phone, park the vehicle before making a call. Do not place the phone where it may break loose in case of collision or sudden stop. Operating Environment Abide by local regulations and turn off your phone where usage is forbidden. When connecting your phone to another device or accessory, refer to the user°Øs manual for safety instructions. [. . . ]