User manual PARASOUND CDP1000

[. . . ] It should be in a well-ventilated area, away from heating ducts or radiators. The area must be free of dust or excessive humidity. The location should be stable and isolated from speakers or foot steps to minimize vibrations which could interfere with the sensitive optical laser and thereby require the error correction circuits to engage for other than defects in the CDs themselves. The unit should not be placed near any component which generates a strong magnetic field, such as a power amplifier. [. . . ] Never interfere with the carousel opening or closing or try to force it with your hand. Make sure the carousel is closed before you turn off the power. Play/Pause Press Play to listen to the disc. Press a second time to pause precisely at any location. During Play or Pause the laser is operating. You can also use the Play button while the disc loading tray is open and it will automatically close the tray and commence normal play. Track Skip These buttons skip tracks each time they are pressed. If you are in the middle of a track, pressing this button once will return play to the beginning of that track. Disc Skip These buttons skip tracks each time they are pressed. If you are in the middle of a track, pressing this button once will return play to the beginning of that track. Search This is a fast review or fast forward cue to assist you in finding a specific segment within a given track. Stop This disengages the laser operation and stops the disc. Once you've pressed Stop, if you press Play again the player will have to spin the disc again for a few seconds before Play can resume. -3- Remote Control Handset The Remote Control Handset duplicates all front panel functions except power on/off. It also contains several additional functions. The remote uses 2 AA batteries; be sure to observe correct polarity. Repeat If you press this button, the disc will play over and over until you press the STOP or REPEAT button again. Display Press this button once to change from normal mode to time remaining on disc, press twice for time elapsed on disc, press three times to return to the normal mode. 2 Normal mode 02 :31 TRACK MIN SEC -15:45 MIN SEC 02:31 MIN SEC First Press: Time remaining on disc Second Press: Time elapsed on disc. Program Programming allows you to select specific tracks or rearrange the entire play sequence. Programming must be performed in the STOP mode. To store tracks on a disk, select the track number with the number or SKIP buttons on the remote handset. Next, press the PROGRAM button to store the selected track. The display will indicate 01 for the first programmed track. The display will then flash 02 until you select the next track and press PROGRAM. [. . . ] This warranty becomes void if the product has been damaged by alteration, misuse, accident or neglect. Alteration includes any removal, obscuration or defacement of its serial number. This warranty becomes void if unit has been connected or operated contrary to printed instructions. The warrantor assumes no liability for property damage or any other incidental or consequential damage whatsoever which may result from the failure of this product. [. . . ]