User manual PARKSIDE KH 3013 CAR POLISHER

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools. The following pictograms are used in these operating instructions / on the device: Read instruction manual!Safety class II Wear hearing protection, dust protection mask, protective glasses and protective gloves. [. . . ] The use of these devices reduces the hazard presented by dust. A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. General safety advice for electrical power tools / Operation D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. [. . . ] Dab the appliance a few times at various points on the area to be buffed. In this way you can ensure that excess wax / polish is once more distributed evenly over the terrycloth bonnet and the area to be buffed. Take both appliance grips 1 firmly in your hands and switch the appliance on by pressing the ON / OFF switch 3 (see also Fig. The self-weight of the car polisher alone applies sufficient pressure for the waxing / polishing process. [. . . ]