User manual PARKSIDE KH 3032 BELT SANDER 600 WATT

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . Page Selecting the correct rotational speed and sanding belt . The following pictograms are used in these operating instructions / on the device: Read instruction manual! [. . . ] Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. General safety advice for electrical power tools / Preparing for use D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. For this reason, always make sure that nobody is placed in any danger and that there are no inflammable materials near the working area. J When undertaking prolonged sanding of wood, and in particular when working on materials that give rise to dusts that are hazardous to health, the sander must be connected to a suitable external dust extraction device. J Ensure that there is adequate ventilation when working on plastic, paint, varnish etc. Of large surfaces of wood, plastic, metal and plaster and painted surfaces. The device is to be used for dry sanding only. Sanding paints containing lead, some types of wood and metal for example may give rise to hazardous or poisonous dusts and represents a risk to the health of the person operating the device and to anyone near the work area. [. . . ] Fine finish (Grit grade) 240 low / medium (2-3) Non-ferrous metals (e. Do not dispose of electrical power tools with the household rubbish!Using the device in a fixed mounting J Turn the electrical power tool upside down as J Insert the two clamps 11 into the recesses 2 provided for this purpose and clamp the electrical power tool securely down on to the surface. In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling. [. . . ]