User manual PARKSIDE KH 3037 MODELLING AND ENGRAVING SET

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools . Careful handling and use of electrical power tools . Page Device-specific safety instructions for small drill KH3037 and mains adapter KH3037-1 . [. . . ] The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. unmodified plugs and matching sockets reduce the risk of electric shock. B) Avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. D) Do not use the mains lead for any purpose for which it was not intended, e. To carry the device, to hang up the device or to pull the mains plug out of the mains socket. General safety advice for electrical power tools You will be in a better position to control the device in unforeseen circumstances. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. G) use the electrical power tool, accessories, inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. [. . . ] First insert the tool you wish to use though the clamping nut 4 before you insert it into the collet 18 suitable for the tool shaft. Press the spindle lock 6 and keep it pressed. Insert the collet 18 into the threaded insert and tighten the clamping nut 4 on the thread using the combination key 23 . Using the Insertion tool with mandrel 12 : NOTE: Use the screwdriver end of the combination key 23 to release or tighten the screw of the mandrels 12 . [. . . ]