User manual PARKSIDE KH 3040 HEAT GUN

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Careful handling and use of electrical power tools . Page Safety advice relating specifically to this device. Page 10 Further examples of uses in the house, car and garden . [. . . ] B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C) Pull the mains plug out of the socket before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. f) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Safety advice relating specifically to this device j Children or persons who lack the knowledge Or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device. Using the device, always pull the mains plug out of the mains socket. Do not direct the device at the same spot for too long a period. Maintain a distance between the jet outlet nozzle and the workpiece or the surface being heated. an air blockage could lead to overheating of the appliance. Pay heed to the direct working area and also to its surroundings. [. . . ] J Warm the pipe evenly, in that you move it back and forth. Use a separate spatula for removing paint or varnish. J Do not apply heat for too long a period, as burnt paint becomes much more difficult to remove. Before carrying out work on the appliance, always remove the plug from the power socket. [. . . ]