User manual PARKSIDE KH 3125 CORDLESS MULTI-GRINDER

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools. Use and handling of the cordless electrical power tool. Page Further special safety advice for disc-cutting . [. . . ] Use a full face visor, safety goggles or safety glasses, depending on the application. Wear a dust mask, hearing protectors, safety gloves or special apron capable of stopping particles of the grinding medium or workpiece, as appropriate for the task. Eyes must be protected from the flying debris which can arise from some operations. Dust or breathing masks must be capable of filtering out the dust generated by the application. Prolonged exposure to loud noise can lead to hearing loss. I) Keep bystanders at a safe distance from your work area. Anyone entering the work area must wear personal protective equipment. Fragments of the workpiece or of a broken attachment could fly off and cause injury beyond the immediate working area. General safety advice for grinding, sanding (with sandpaper), wire brushing, polishing and disc-cutting: a) This electrical power tool is intended for use as a grinding, sanding, wirebrushing, and disc-cutting machine. Observe all the safety advice, instructions, information in figures and all other information you received with this device. If you do not observe the following advice it could lead to electric shock, fire and / or serious injury. B) Normative statement / advice for this tool is not applicable. C) Do not use any accessory not specifically intended by the manufacturer for this electrical power tool. Although an accessory may fit on your electrical power tool, this does not on its own guarantee that it can be safely used. D) The maximum permitted speed of an attachment must be at least as high as the maximum speed indicated for the electrical power tool. An accessory rotating faster than its permitted speed could disintegrate or fly off. E) The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. General safety advice for electrical power tools Ing work where there is the danger of the attachment striking hidden electricity cables or the device's mains lead. Contact with a live wire could cause metal parts of the device to become live and lead to electric shock. Keep the mains lead away from rotating attachments. If you lose control of the device the mains lead may become severed or trapped and your hand or arm may be pulled into the rotating attachment. D) Work particularly carefully in the area of corners, sharp edges etc. [. . . ] Before and after a prolonged period of non-use fully charge the battery pack 3 . If you use press too hard you run the risk of breaking the tool or damaging the workpiece. You will achieve the best results by operating the tool at a constant rotational speed and using a low contact pressure on the workpiece. Clean all the dirt off the drill / grinder. [. . . ]