User manual PARKSIDE KH 3136 SABRE SAW

[. . . ] PFS 710 Operation and Safety Notes Operation and Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5 a i k b c j d e h g f A B C l m n o D E F Kompernaß GmbH Burgstraße 21 · D-44867 Bochum (Germany) Last Information Update: 10 / 2006 · Ident. -No. : PFS710-102006-2 / UK / IE Table of Content Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual!Observe caution and safety notes! V~ Voltage Wear protective gloves, safety goggles, ear protection and particle mask Proper procedure and handling! [. . . ] Do not misuse the electrical cable, e. g. to carry the appliance, suspend it in storage or to pull the plug from the socket. Keep the cable away from heat, oil, sharp edges or appliance components in motion. Damaged plugs or tangled cables increase the risk of electrocution. Regularly check the connections of electrical hand tools and, if damage is discovered, arrange for them to be repaired by a recognised specialist. When working outdoors, only use extension cables that are approved for use outdoors. The use of an extension cable suitable for employment outdoors reduces the risk of electrocution. J J J J Safety J Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves well away from moving components. Loose, not well-fitting clothing, jewellery and long hair can become caught up in moving components. J Use dust suction and / or collection units if these can be assembled. Thereby take note that the dust collection units fitted must be suitable for this particular area of application. The correct use of these equipments reduces potential dangers caused by dust. Use clamps / vices to firmly hold the workpiece. It is thus better secured than just with your hand. Many accidents have their origin in poorly maintained electrical hand tools. Carefully maintained cutting tools with sharp cutting edges jam less often and are easier to guide. J Keep hand grips dry, clean and free from oil and grease. J Use electrical hand tools, accessories or ancillary components only in accordance with these instructions and in such a manner as is detailed for the particular types of appliance. Take consideration thereby of the working conditions and the task to be completed. The use of electrical hand tools for purposes other than those originally intended can lead to dangerous situations. L Diligent Interaction and Use of Electrical Hand Tools electrical hand tool that is applicable to the work to be done. [. . . ] Always make sure the saw blade type and the blade speed and oscillation settings are suitable for the workpiece. arrow blades are best for tight curves. N 10 GB/IE Preparing the saw for use / Cleaning / Disposal / Information j he footplate g must always be set against the T workpiece surface. j aw through the workpiece using even pressure S and speed of progress. [. . . ]