User manual PARKSIDE KH 3162 HAMMER DRILL

[. . . ] Before you begin reading this information, please unfold the page with the illustrations and familiarize yourself with all functions of the tool. Careful handling and use of electrical power tools. General safety advice for electrical power tools The following pictograms are used in these operating instructions / on the device: Read instruction manual!Drill chuck, Made In Germany Device function selector switch Chiselling Hammer drilling Drilling Chisel position adjuster Adjusting the chisel position Wear hearing protection, dust protection mask, protective glasses and protective gloves. [. . . ] By doing this you will be in a better position to control the device in unforeseen circumstances. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. Iar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. [. . . ] The RÖHM quick-action drill chuck allows you to change the tool quickly without any additional implements. Releasing the tool holder and inserting a tool: j Hold the rear sleeve of the quick-action drill chuck tightly and turn the front sleeve until it is wide enough for the tool (e. Clamping the Tool: j Hold the rear sleeve of the quick-action drill chuck tightly and turn the front sleeve forcefully until you hear a repeated clicking noise. the drill chuck is now locked in place. [. . . ]