User manual PARKSIDE KH 3162 PNEUMATIC HAMMER DRILL

[. . . ] PEBH 1010 Operation and Safety Notes P QWE R T Y O I U A B C D E Content Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual!Dangerous electric current ­ danger to life! V~ W Voltage Watt (performance) Wear ear protection, safety goggles, particle mask, and protective gloves Protection category II power tool n0 Rated idle running speed Introduction For your safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Intended Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Simply a few moments of inattention in the use of an electrical appliance can lead to serious personal injuries. Wear personal protective clothing and, always, protective glasses. The wearing of personal protective clothing such as dust masks, antislip safety shoes, protective gloves, hard helmet and hearing protection can, depending on the use of the electrical appliance, reduce the risk of injuries. Avoid unintentional starting of the appliance. Ensure that the switch is in the "OFF" position before inserting the plug into a wall socket. If GB/IE 7 J The power plug of the appliance must fit correctly into the wall socket. DO NOT use adapter plugs together with earthing-protected appliances. Non-modified plugs and appropriate wall sockets reduce the risk of electric shock. J Avoid physical contact with earthed surfaces, such as pipes, heating elements, cookers and refrigerators. There is an increased risk of electric shock if your body is earthed. J Protect the appliance from rain and moisture. The permeation of water into an electrical appliance increases the risk of an electric shock. to carry the appliance, to hang it up or for pulling the plug J J General Safety Notices you carry the appliance with your finger on the ON / OFF switch or connect the appliance to the mains supply whilst it is switched on, this can lead to serious accidents. Remove all adjustment tools or screwdrivers before switching the appliance on. A tool or key in a spinning appliance component can cause serious injuries. Ensure you have a secure positioning and are in balance at all times. You can thus control the appliance so much better, especially in unexpected situations. Keep your hair, clothing and gloves away from moving components. Loose and hanging clothing, jewellery and hair can become caught up in fast rotating appliance components. Use dust collecting equipments if these can be assembled onto the appliance. Take note thereby that the dust collecting equipment must be suitable for this particular operation. The correct application of these equipments reduces the dangers originating from dust. [. . . ] L The functions are marked as follows: Function Drilling / screwing Hammer drilling Chiselling Chisel position adjustment Symbol Selecting the Angle of Rotation Note: Use / adjustment of the clockwise / counterclockwise switch U is only permitted with the device standing still. When switched to counter-clockwise rotation the device automatically runs at a reduced speed. 10 GB/IE Using the Device / Maintenance and Cleaning / Disposal L Pre-selecting the Speed L Maintenance and Cleaning J J j j Warning!Before carrying out any work on the drill you should always remove the plug from the socket!No liquids must be allowed to enter the hammer drill. [. . . ]