User manual PARKSIDE KH 3166 HOT AIR GUN

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. Page Careful handling and use of electrical power tools . Page Safety advice relating specifically to this device . The following icons / symbols are used in this instruction manual: Read instruction manual! [. . . ] Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. f) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Do not work in the vicinity of easily ignitable gases or materials. heating of plastics , paints , varnishes etc. Can lead to the creation of gases that are hazardous to health. Make sure you always have adequate ventilation. Let the device cool down completely before you put it into storage. Always place your heat gun down on its end, with the nozzle pointing upwards. In addition, you should never leave the device working unattended. When taking a break from your work, before carrying out any tasks on the device itself (e. Changing the nozzle) or when you are not using the device, always pull the mains plug out of the mains socket. Do not direct the device at the same spot for too long a period. Maintain a distance between the jet outlet nozzle and the workpiece or the surface being heated. an air blockage could lead to overheating of the appliance. Pay heed to the direct working area and also to its surroundings. The heat produced could reach to inflammable articles located out of the visible area. Always keep the device clean, dry and free of oil or grease. Never use the device for a purpose for which it was not intended. [. . . ] Wax removal: j You can remove wax residues from skis / snowboard or from candle holders. Use the amount of care appropriate to the product. In accordance with European Directive 2002 / 96 / EC relating to old electrical and electronic appliances and its translation into national law, used electric tools must be collected separately and recycled in an ecologically desirable way. Please contact your local council office to find out about disposal facilities for your worn-out electrical tools. [. . . ]