User manual PARKSIDE PAHKS 18V

[. . . ] Never remove sawdust or splinters whilst the saw is running ­ always switch off the saw and remove the battery pack ³ first. 4 When you are using the circular saw always wear ear protectors and protective glasses. Protective gloves, robust non-slip shoes, and a protective apron are also recommended. Every time before using the circular saw make sure that you check it for any damage. If any parts are damaged have them fixed or replaced at a specialist repair centre. [. . . ] 07. If the tool is dropped or otherwise subjected to mechanical stress, you should have it examined by an appropriate specialist for damage before using it again. Do not let it fall or be subject to impact. 5 09. Do not attempt to repair the charger or the battery pack yourself. Repairs must always be carried out by an appropriate specialist. Not complying with this can lead to danger. 10. Always remove the plug from the mains socket before you clean or maintain the charger or the battery pack. 11. Do not charge the battery pack if the ambient temperature is less than 10 ° C or greater than 40 ° C. 12. Air must be able to flow freely around the charger. 13. Do not short circuit the battery pack. A short circuit gives rise to a heavy current, overheating, the danger of fire or to the battery pack exploding. Any of these can cause damage to the battery pack or danger to the user. Therefore: · Do not connect a cable to the battery pack terminals. · Make sure that no metal objects (nails, paperclips, coins etc. ) find their way into the battery pack charging socket. · Do not expose the battery pack to water or rain. 14. A damaged battery pack or one which no longer holds its charge must be disposed of specially and not placed in normal household rubbish. 15. Never throw the battery pack into fire or water. Insertion and removal of your battery pack Before removing the battery pack from the charger or inserting it into the charger, always ensure the plug is not in the mains socket. When attaching the battery pack, the groove in the battery pack must align with the guide on the cordless circular saw. The battery pack should insert easily into the charger. Do not use any disproportionate force during insertion or the battery pack may not end up in its correct position. After the battery pack has been inserted check that the retaining clips have engaged and the battery pack is seated firmly in the charger. To remove the battery pack from the charger press the retaining clips on the sides of the battery pack and remove it. Charging the battery pack Before inserting the battery pack into the charger or removing it from the charger, always ensure the plug is not in the mains socket. [. . . ] Please read the last part of these instructions for how to exactly adjust the angle adjuster. SETTING THE CUTTING ANGLE You can set the cutting angle accurately using the cutting angle scale. Release the wing nut on the angle adjuster and set the required angle on the scale before retightening the wing nut. Caution: Check the cutting angle on a test cut! 7 SETTING THE CUTTING DEPTH Please note!If possible we recommend that the cutting depth is set to 5 mm greater than the material thickness. [. . . ]