User manual PARKSIDE PBSG 55 A1

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following pictograms are used in these operating instructions / on the device: Read instruction manual!Wear hearing protection, dust protection mask, protective glasses and protective gloves. Risk of loss of life by electric shock from damaged mains lead or mains plug! [. . . ] All parts must be correctly attached and fulfil all the requirements necessary to allow the electrical power tool to operate properly. ½ Damaged safety equipment and components must be properly repaired or replaced at a competent electrical equipment repair centre ½ Never use an electrical power tool that cannot be switched on and off properly. ½ The use of inserted tools and accessories other than those recommended by the manufacturer could lead to you being injured. Have your electrical power tool repaired at an electrical equipment repair specialist. ½ This electrical power tool complies with the relevant safety regulations. Repairs may only be carried out by a specialist electrical repair centre using original spare parts, otherwise injury could occur to the user. ½ ½ Make sure that the device is switched off before inserting the mains plug into the socket. Always pull the mains plug out before carry out cleaning or maintenance work. This is to prevent the device starting up by accident. The ventilation openings 10 of the motor unit must always be kept clear. Otherwise there is a risk of the device overheating. When carrying out work on the device as well as transporting or storing it, move the ON / OFF switch 4 to the "0" position (off) in order to prevent it switching itself on by accident. That is why you should always make sure that no-one is at risk from them and that no combustible materials are located in the proximity of the area of work. Use the ON / OFF switch 4 to switch the grinder off in the event of a power failure or when pulling This prevents the grinder restarting by accident, which could cause injury to you. Never operate the grinder if the power cable or mains plug is damaged. Grinding stones must be carefully stored and handled according to the manufacturer's instructions. Make sure that the grinding tools are appropriate in line with the instructions of the manufacturer. Check the grinding stone before using it; do not use any broken, cracked or otherwise damaged goods. Make sure that a grinding tool is correctly fitted and fastened before using it. Place the grinder in a safe place and allow it to run idly for 30 seconds. Stop it immediately if considerable oscillations occur or if defects are observed. If this occurs, check the machine to find out the cause. [. . . ] This will ensure that your device remains safe to use. If the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]