User manual PARKSIDE PDKS 120

[. . . ] pDKS 120 SCROLL SAW Operation and Safety Notes 6 10 11 9 1 8 7 6 6a 5 4 3 2 7 14 12 a 13 10b b 10 c 10a 10 12 C D 45° 1 e 45° F Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. GB / IE / CY Operation and Safety Notes Page 5 Table of contents Introduction Intended purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Features and equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Included items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 6 6 7 Safety advice Working safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Safety advice relating specifically to scroll saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Advice on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9 Attaching the blade guard (see Fig. A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9 Attaching the feet (see Fig. B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10 Attaching the dust blow tube (see Fig. C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10 Assembly Bringing into use Setting the stroke rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 10 Tilting the saw table (see Figs. [. . . ] Check the electrical power tool for damage. Before the electrical power tool is used, carefully check the safety equipment and any slightly damaged parts to see that they are still working properly. Check that all moving parts on the tool are working properly, can move freely and are not damaged. All parts must be correctly attached and fulfil all the requirements necessary to allow the electrical power tool to operate properly. Damaged safety equipment and components must be properly repaired or replaced at a competent electrical equipment repair centre unless otherwise indicated in the operating instructions. Damaged switches must be replaced at a Customer Service Centre. Never use an electrical power tool that cannot be switched on and off properly. The use of inserted tools and accessories other than those recommended by the manufacturer could lead to you being injured. Have your electrical power tool repaired at an electrical equipment repair specialist. This electrical power tool complies with the relevant safety regulations. Repairs may only be carried out by a specialist electrical repair centre using original spare parts, otherwise injury could occur to the user. J 17. Safety advice relating specifically to scroll saws J Ensure that the scroll saw stands on a level, J Do not touch the mains lead if it becomes damaged or cut through while you are using the device. Pull the plug out of the mains socket immediately and have the device repaired by a horizontal surface. J 18. 8 Safety advice / Assembly suitably qualified person or at the Customer Service Centre. Always work with the mains lead leading away from the rear of the device. If a dangerous situation arises, pull the mains plug immediately out of the mains socket. Always switch on the electrical power tool before moving the workpiece against it. Otherwise there is the risk of kickback. Do not cut moist materials or damp surfaces, Use only undamaged, defect-free saw blades 7 . Distorted or blunt saw blades 7 can break or cause a kickback. Ensure that the teeth on the saw blade 7 point downwards before you mount it in the device. Keep your hands away from the area of the saw blade. Before sawing, check the workpiece for foreign bodies such as nails etc. Injury and / or damage to property may result from the saw blade striking nails etc. [. . . ] If the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. Q Warranty Removing the saw blade 7 : j Lift up the clamping lever 13 . j Press the top saw blade mount 8 downward. j Unhook the saw blade out of the bottom saw blade mount 14 by moving it forward. Q Q Maintenance and cleaning Maintenance WARNING! [. . . ]