User manual PARKSIDE PFS 280 A1

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . Page 9 Placing sprayed material into the paint cup . The following pictograms are used in these operating instructions / on the device: Read instruction manual! [. . . ] Do not spray on yourself, other people or animals. Keep hands and other body parts away from the spray jet. If the spray penetrates the skin, seek medical help immediately. Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. Careful handling and use of electrical power tools Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Use the electrical power tool, accessories, inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. General safety advice for electrical power tools / Before use Sprayed can even penetrate the skin through a glove and be injected into your body. do not treat an injection as a simple cut. A high pressure jet may inject toxins into the body and cause serious injuries. If the spray is injected into the skin, seek medical help immediately. Pay attention to any possible dangers of the material being sprayed. Note the markings on the container or the manufacturer's information relating to the material being sprayed, including the instruction to use personal protective equipment. The manufacturer's in-structions must be followed to reduce the risk of fire, as well as injuries caused by toxins, carcinogens, etc. Never spray without the nozzle head in place. [. . . ] Always hook the carabiners attached to the carrying strap 14 to the attachment eyes 14a. If necessary, adjust the length of the carrying strap to suit your requirements. Ensure that the motor 11 cannot suck in any of the sprayed material during operation. Position it at an adequate distance away, on a clean, dust-free surface. [. . . ]