User manual PARKSIDE PMFW 280 A2

[. . . ] Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools Careful handling and use of electrical power tools . Page Safety advice relating specifically to this multifunction tool . The following pictograms are used in these operating instructions / on the device: Read the operating instructions! [. . . ] D) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. General safety advice for electrical power tools and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. Have damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical power tools. Carefully maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. Wear protective gloves when replacing a tool in the device. Use the electrical power tool only for dry abrading / sawing / cutting. Do not operate the device if it is damp and do not use it in a damp environment. [. . . ] Ensure that your working area is well ventilated. Plunge saw blade (32 mm) 6 Materials: Wood, plastic, plasterboard and other soft materials Use: · Close to the edge sawing, even in difficult to access areas Example: Sawing of recesses in lightweight walls. Removal of material residues, for example tile adhesive when replacing damaged tiles (see Fig. Close to the edge sawing, even in difficult to access areas Example: Laying parquet and other floor coverings, including plunge sawing. [. . . ]