User manual PARKSIDE PMGS 12 B2

[. . . ] Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. General safety advice for electrical power tools . Careful handling and use of electrical power tools . Page Further special safety advice for disc-cutting . [. . . ] When you have inspected and inserted the attachment, position yourself and bystanders away from the plane of the rotating attachment and run the device at maximum speed for one minute. Damaged attachments will usually break apart during this test. Use a full face visor, safety goggles or safety glasses, depending on the application. Wear a dust mask, hearing protectors, safety gloves or special apron capable of stopping particles of the grinding medium or workpiece, as appropriate for the task. Eyes must be protected from the flying debris which can arise from some operations. Dust or breathing masks must be capable of filtering out the dust generated by the application. Prolonged exposure to loud noise can lead to hearing loss. I) Keep bystanders at a safe distance from your work area. Anyone entering the work area must wear personal protective equipment. Fragments of the workpiece or of a broken attachment could fly off and cause injury beyond the immediate working area. J) Hold the device by the insulated handle surfaces when you are undertaking work where there is the danger of the attachment striking hidden f) Contact with a live wire could cause metal parts of the device to become live and lead to electric shock. Keep the mains lead away from rotating attachments. If you lose control of the device the mains lead may become severed or trapped and your hand or arm may be pulled into the rotating attachment. Never lay the electrical power tool down until after the attachment has come to a complete standstill. The rotating attachment may snag when it comes into contact with the surface and cause you to lose control of the device. Do not have the electrical power tool running while you are carrying it. Your clothing could become trapped by unintentional contact with the rotating attachment and the tool could be pulled into your body. Clean the ventilation slots on your electrical power tool regularly. the motor's fan draws dust into the housing. A build-up of metal dust could give rise to an electrical hazard. Never use the electrical power tool near inflammable materials. Do not use attachments that require the use of coolants. [. . . ] Clean all the dirt off the drill / grinder. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. [. . . ]