User manual PARKSIDE PSG 50 A1 MANUAL 6

[. . . ] Risk of loss of life by electric shock from damaged mains lead or mains plug!Wear hearing protection, dust protection mask, protective glasses and protective gloves. Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. [. . . ] f) Use a residual current device (RCD) for protection if operating the electrical power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock. Hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. G) If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices reduces the hazard presented by dust. Careful handling and use of electrical power tools a) Do not overload the device. Always use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B) Do not use an electrical power tool if its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. g) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. The use of tools or other accessories which are not recommended in the instructions may represent a risk of injury. In order to avoid injury, fire and health hazards: ½ Secure the work piece. Use clamping devices / a vice to hold the work piece. It is then held more securely than with your hand. There is a danger of injury from splintering materials flying into your eyes etc. During prolonged working with wood and particularly if materials are processed which produce dusts that are hazardous to the health. ½ Do not soak materials or areas which are to be worked on with solvent-containing liquids. [. . . ] Re-tighten the cap nut 6 with the key 8 in a clockwise direction. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. [. . . ]