User manual PARKSIDE PSG 50 B2

[. . . ] POWER CARVING TOOL PSG 50 B2   POWER CARVING TOOL   Operation and Safety Notes   Translation of original operation manual   Käyttö- ja turvaohjeet   Alkuperäisen käyttöohjeen käännös   SÄHKÖKÄYTTÖINEN KAIVERRUSTALTTA   Bruksanvisning och säkerhetsanvisningar   Översättning av bruksanvisning i original    MOTORSKÄRARE Brugs- og sikkerhedsanvisninger   Oversættelse af den originale driftsvejledning    TRÆSNITTEMASKINE Bedienungs- und Sicherheitshinweise   Originalbetriebsanleitung    MOTORSCHNITZGERÄT Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the    device. Careful handling and use of electrical power tools. Page 9 General safety advice for electrical power tools Operation Turning the Device On / Off. Page 11 GB/IE 5 Introduction The following pictograms are used in these operating instructions / on the device: Read instruction manual! [. . . ] One moment of carelessness when using the device can lead to serious injury. B)  Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c)  void unintentional operation of the A device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on. D) emove any setting tools or spanners R before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. By doing this you will be in a better position to control the device in unforeseen circumstances. Do not wear loose clothing or jewellery. Keep your 8 GB/IE a)  o not overload the device. Always D use an electrical power tool that is intended for the task you are undertaking. By using the right electrical power tool for the job you will work more safely and achieve a better result. B)  o not use an electrical power tool if D its switch is defective. An electrical power tool that can no longer be switched on and off is dangerous and must be repaired. C)  ull the mains plug from the socket P before you make any adjustments to the device, change accessories or when the device is put away. This precaution is intended to prevent you from unintentionally starting the device. D)  hen not in use always ensure that W electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check  that moving parts are working properly and move freely. Check for any parts that are broken or damaged enough to detrimentally affect the functioning of the device. [. . . ] Switch the device off and pull the plug out of the mains socket before carrying out any work on the device. The blade inserts 7 have very sharp cutting edges.  Wear appropriate protective gloves when inserting and testing the blade. The choice of blade insert 7 depends on the intended task. [. . . ]