User manual PARKSIDE PTKS 1800 SE

[. . . ] TABLE sAW Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the device. PTKS 1800 SE Operation and Safety Notes TABLE SAW Kompernaß GmbH Burgstraße 21 44867 Bochum (Germany) GB / IE / CY Operation and Safety Notes Page 5 Last Information Update: 04 / 2008 · Ident. -No. : PTKS1800SE042008 - 6 A 1 1a 2 2a 3 4 5 F 6 7 8 8c 9 10 G H 18 16 15 13 I n0 4 50 0 min -1 18 17 11 2mm -1 14 14a 700 0 12 -1 min 17 ø 30 mm m -5m . 3 ax m 16 15 14a 14 13 K C 23 1b 1c L B 6 22 21 8c 8b 8d 8a 20 19 M E 10 4 25 24 N HIGH LOW D HIGH LOW 0 1 HIGH LOW 0 1 2 3 4 5 Table of content Introduction Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Features and equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Included items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 6 7 7 Safety advice Working safely. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Safety advice relating specifically to this device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9 Original accessories / attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11 Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11 Integrated safety devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 11 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12 13 13 13 13 14 14 14 14 Preparing the device for use Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12 Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Attaching the guide fence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Attaching the mitre guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Sawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Setting the riving knife . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Changing the saw blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Transport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Keeping your table saw safe and secure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Servicing and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15 Information Service centre . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15 Declaration of Conformity / Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15 GB/IE/CY 5 Introduction The following icons / symbols are used in this instruction manual: Read instruction manual!Safety class II Wear hearing protection, dust protection mask, protective glasses and protective gloves. Keep children and other unauthorised personnel at a safe distance when using electrical tools. Keep the device away from rain or moisture. [. . . ] J Use the riving knife and keep it correctly set. J Use the blade guard and keep it correctly set. J Do not carry out any rebating or grooving unless a suitable guard, such as a tunnel guard, is attached to the saw table. J The circular saw must not be used for slotting (a groove ending in the workpiece). J Only use saw blades that have a highest permissible speed not less than the maximum shaft speed (rated speed of the table saw and the workpiece being sawn). J Transport the machine by the provided handling points only; do not use the guards to handle or move the machine. J The top part of the saw blade must be covered by the saw blade guard during transport. Curved or round workpieces must be secured against slipping during sawing. J Do not saw any material containing asbestos. J Take precautions when working with dusts which may be hazardous to health, combustible or explosive. For example: Some dusts are classed as 10 GB/IE/CY J J J J J J Safety advice / Preparing the device for use or other objects that come into contact with the rotating sawblade could strike the operator at high speed. Always saw just one workpiece at a time. Workpieces placed one above the other or side by side may jam the sawblade or slip with respect to one another during sawing. Always use the guide fence or the mitre guide. This will improve the accuracy of your cut and reduce the risk of the blade jamming. If the saw blade jams or you pause from your work, switch off the machine and hold the workpiece still, until the saw blade has reached a standstill. Never remove the workpiece while the saw blade is still rotating, otherwise this may result in kickback. Determine and rectify the reason for the saw blade jamming. Do not use blunt, cracked, distorted or damaged saw blades. Saw blades with blunt or misaligned teeth are in effect too wide for the designed saw gap and this gives rise to increased friction, jamming and kickback. Always use a saw blade of the correct size and with the appropriate central fixing hole bore (e. g. Saw blades that do not correspond with the attachment components on the saw will not run true and could lead to loss of control. [. . . ] Tighten fully with the combi-tool 11 whilst holding it still with the counter key 10 . Attach the cover plate 23, the table insert 7 and the blade guard 2 . Q Transport person and hold the saw at the recesses in the housing. j When moving the table saw do it with another Q Changing the saw blade Q WARNINg!Before you carry out any work on the device always pull the mains plug out of the mains socket. Wear protective gloves when replacing the saw blade 4 . [. . . ]